Sunsdrew 2024 Side Steps for Ford Bronco Installation Guide
- June 1, 2024
- Sunsdrew
Table of Contents
Sunsdrew 2024 Side Steps for Ford Bronco
Product Information
- Specifications
- Product: Side Step for Ford Bronco 2021+ (2-door/4-door)
- Kit Contents (2 Packs):
- A. Side Step (x2)
- B. EVA Pad (x4)
- C. Screw M8x30 (x4)
- D. Nut M8 (x4)
- E. M8 Allen Key (x1)
- F. Wrench (x1)
Product Usage Instructions
- Installation Steps:
- Paste the EVA pad on the back of the bracket.
- Install the M8 nut and M8x30 screw on the bracket.
- Put the side step into OEM Rock Rail.
- First, use the Allen key to tighten the screws until the side step is fixed.
- Then, tighten the anti-slip nut.
- Finish installation.
FAQs
- Q: Can the Side Step be installed on both 2-door and 4-door Ford Broncos?
- A: Yes, the Side Step is compatible with both 2-door and 4-door Ford Broncos from 2021 onwards.
- Q: Do I need any special tools for installation?
- A: The kit includes all necessary tools for installation, including an Allen key and a wrench.
KIT CONTENT LIST
KIT CONTENT LIST (2 Packs):
- A. Side Step (x2)
- B. EVA Pad (x4)
- C. Screw M8x30 (x4)
- D. Nut m8 (x4)
- E. M8 Allen Key (x1)
- F. Wrench (x1)
(If you purchase a 4-pack kit, the side step and hardware will be doubled.)
INSTALLATION STEPS
- STEP 1: Paste the EVA pad on the back of the bracket.
- STEP 2: Install M8 nut and M8X30 screw on the bracket.
- STEP 3: Put the side step into OEM Rock Rail.
- STEP 4: First, use the allen key to tighten the screws until the side step is fixed.
- STEP 5: Then, tighten the anti-slip nut.
- STEP 6: Finish.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>