EMART ‎EM-AGGL-1-PS Dusk to Dawn Outdoor Front Porch Light User Guide

USE AND CARE GUIDE
**14.5 IN. BLACK/WHITE/GOLD
EXTERIOR PHOTO WALL LANTERN

**

Questions，problems，missing parts? Before returning to the store, come for us first.
Providing the best service to customers has always been our mission.

THANK YOU
We appreciate the trust and confidence you have placed in our store through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home. Thank you for choosing us!

Safety Information

Read and understand this entire manual before you attempt to assemble, install, or operate this product.
If you have any non-electrical questions about this fixture, please contact our Customer Service first. Please reference your order number and describe specific issues to us.

WARNING:
Before starting the removal of an old fixture or the installation of this fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
CAUTION : This product contains one or more chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Wash your hands after handling this product.

Warranty

LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturers only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed , setup, reused in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained here in. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor or expense costs involved in the replacement or repair of said product.

Pre-Installation

PLANNING INSTALLATION
Before beginning installation, make sure all parts are included using the Hardware Included and Package Contents sections.
If any part is missing or damaged, do not attempt to assemble, install, or operate the product. To avoid damaging this product, place it on a soft, non- abrasive surface, such as carpet or cardboard.
TOOLS REQUIRED (NOT INCLUDED)

HARDWARE INCLUDED

NOTE : Hardware not shown to actual size.

PACKAGE CONTENTS

Installation

1.  Before starting the removal of an old fixture or the installation of this fixture, disconnect the power first to ensure your safety.

2. Loosen the screw E of the lamp cover, then swap the positions of A and E up and down and tighten them. Then mount the body of the fixture on the wall by aligning the protruding mounting screws (CC) all the way through the holes on the wall plate (G).

3. Screw the two mounting screws (CC) into the mounting bracket.
   Mount the mounting bracket (DD) to the outlet box using the two outlet box screws(BB). Make sure the threads ofthe mounting screws (CC)are facing away from the outlet box when the mounting bracket is attached to the outlet box.

4. Wrap the ground wire from the fixture around the ground screw (AA), and then connect the ground wire from the fixture to the ground wire from the outlet box.
   Connect the white wire from the fixture to the white wire(neutral wire) from the outlet box, and the black wire from the fixture to the black wire (live wire) from the outlet box. Cover the two wire connections using the two wire connectors (EE).Wrap the two wire connections with electrical tape formore secure connections.
   Position the wires back inside the outlet box.

Care and Maintenance

WARNING : Before you perform any cleaning or maintenance work, turn off the electricity at the main circuit breaker panel.

• Use a dry or slightly dampened clean cloth to wipe the surface of the fixture.
• Disconnect the power to the fixture by turning the circuit breaker off or by removing the fuse at the fuse box.

NOTE : Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Troubleshooting

supply is on.
There is a faulty switch.| Test or replace the switch.
There is a faulty wire connection.| Check the wiring.
There is a faulty driver.| Replace the driver.
The fuse blows or the circuit breaker trips when the light is
turned on.| There are crossed wires or power wire is grounding out.| Check the wire connections.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>