AUDIO ENHANCEMENT ST-XD-0602 XD Receiver User Guide
- June 1, 2024
- AUDIO ENHANCEMENT
Table of Contents
AUDIO ENHANCEMENT ST-XD-0602 XD Receiver
Product Information
Specifications:
- Product Name: XD Receiver
- Model: ST-XD-0602, ST-XD-0601
- Functionality: Firmware update for XD Teacher Microphone with Intercom Button and Secure Room Button
Product Usage Instructions
Equipment Needed:
- USB to RS232 adapter cable
- RS232 to Phoenix adapter cable
- XD Receiver Firmware
Cable Preparation:
Follow these steps to prepare the cables:
- Purchase a USB to RS-232 cable with a 9 pin DB9 connector.
- Purchase a female DB9 connector.
- Purchase a 3 Pin Phoenix connector.
- Build the RS232 Adapter cable by wiring the DB9 connector to the Phoenix Connector. Ensure the cable is long enough to reach from the wall-mounted amplifier to your computer.
Update Process :
- Identify the XD Receiver to be updated.
- Disconnect the RS232 connection on the XD Receiver.
- Connect the USB to RS232 Cable to the XD Receiver following the same pin configuration as the cable that was removed.
- Program the XD Receiver by:
- Extracting the software from the Zip file package. Running Setup.
- Ensuring the RJ45 cable remains connected for power during the update.
- Launching the App from the desktop icon after Setup completion.
- Following the instructions in the application. The firmware update may take up to 6 minutes.
- Checking for the successful completion message before disconnecting the receiver.
- Remount the unit and reconnect all cables to appropriate ports.
FAQ :
-
Q: How long does the firmware update process take?
A: The firmware update process can take up to 6 minutes to complete. -
Q: Do I need to keep the RJ45 cable connected during the update?
A: Yes, the RJ45 cable should remain connected as it provides power to the XD Receiver during the update process.
XD RECEIVER
FIRMWARE UPDATE GUIDE
OVERVIEW
The new XD Teacher Microphone has added an Intercom Button and Secure Room
Button. To use this new functionality in schools who have the new microphones
with receivers shipped before December 2023, the software for the ST-XD-0601
and ST-XD-0602 XD receivers must be updated. A physical connection to the
receivers is required to do this update.
EQUIPMENT NEEDED
- USB to RS232 adapter cable.
- RS232 to Phoenix adapter cable.
- XD Receiver Firmware
XD RECEIVERS
CABLE PREPARATION
USB TO RS232
A cable can be purchased from Audio Enhancement®, or it can be built using the following instructions.
- Purchase a USB to RS-232 cable. Usually this will come with a 9 pin DB9 connector (Figure 1).
- Purchase a female DB9 connector (Figure 2).
- Purchase a 3 Pin Phoenix connector (Figure 3).
- Build the RS232 Adapter cable by wiring the DB9 connector to the Phoenix Connector. This cable should be long enough to reach a wall mounted amplifier to your computer.
| FUNCTION | D89 | PHOENIX |
|---|---|---|
| TxD | 3 | 2 |
| RxD | 2 | 3 |
| Ground | 5 | 1 |
PROCESS
- Identify the XD Receiver to be updated.
- Take note of all inputs and cables connected to unit for successful reinstall at completion of process.
- Disconnect the RS232 connection on the XD Receiver.(Figure 4)
- Connect the USB to RS232 Cable to the XD Receiver to the same pins as the cable that was removed.
- Program the XD Receiver by following these steps:
- Extract the software from the Zip file package.
- Run Setup.
- When Setup is completed, launch the App from the desktop icon.
- Follow the instructions shown in the application (Figure 5). It can take up to 6 minutes for the firmware update to complete.
- When successfully completed, the following message will be displayed: “Receiver on COMXX upgraded successfully to VX.XXRXX (FP_US). You may now disconnect the receiver.”
- Remount the unit and reconnect all cables to appropriate ports.
NOTE
The RJ45 cable should remain connected during the update process. The RJ45
cable provides power to the XD Receiver. The PoE to the amplifier powering the
XD Receiver must also remain on during the update process.
AudioEnhancement.com · 800.383.9362