PHILIPS TCAT65 Series Accent Track D65 Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS TCAT65 Series Accent Track D65
BOX CONTENTS
Symbols
| CCT, CRI | Lumen |
|---|---|
| 3000K, Ra 80 | 2200 |
| 4000K, Ra 80 |
LIFE L80B50 70 khrs
Inrush current
QR Code Scanner
To get an Overview of all spare parts for a luminaire. please refer to detailed instructions in the service manual available via the Signify Service tag apps (Andriod and iOS).
Lumen pack| CRI, CCT| Inrush current (A)| Inrush current Twidth (μs)| Max
Luminaires / Lumen MCB 16A type B (≤)
---|---|---|---|---
PSU| DIA| WIA| PSU| DIA| WIA| PSU| DIA| WIA
12S| 830 / 840 / PW930 / PW940 / PC930| 13.3| | | 132| | | 60
| |
17S| 830 / 840 / PW930 / PW940| 13.3| | 8.1| 132| | 31| 60| | 51
20S| PC930| 14.1| 18| | 131| 2.8| | 60| 27|
22S| 830 / 840 / PW930 / PW940/PC930| 14.1| | | 131| | | 60| |
27S| 830 / 840 / PW930 / PW940| 14.1| | | 131| | | 60| |
Safety Precautions
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
OPTICAL CLEANING
IF THE PRODUCT IS FITTED WITH A FRONT GLASS OR COLLIMATOR LENS CLEAN IT ONLY
WITH MICROFIBER CLOTH!
IF THE PRODUCT IS WITHOUT FRONT GLASS OR COLLIMATOR LENS CLEAN IT ONLY WITH
PRESSURIZED AIR!
Projector track-mounted
| | A (mm)| B (mm)|
---|---|---|---|---
Reflector| PSU| 148| 107| 0.414
DIA| | 238| 0.434
WIA| | 224| 0.424
Collimator| PSU| | 107| 0.414
DIA| 132| 238| 0.432
WIA| | 224| 0.422
Track version PSU assemble/disassemble
SNOOT INSTALLATION
Reflector / Collimator
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or
label.
© 2024 Signify Holding.
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial offer and does not form part of any quotation
or contract. Philips and the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding
or their respective owners.
Signify Holding. The Netherlands
2024-02-26 442296464591 © 2024 Signify Holding. All rights reserved
Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/