AUTOFREE NRM03B101 Rear Bumper User Manual

AUTOFREE NRM03B101 Rear Bumper

Specifications:

• Model: NRM03B101, NRM03B102
• Material: Q235A
• Product Dimensions: 77.3 x 19.8 x 11.5 inch (NRM03B101), 76.9 x 18.3 x 10.8 inch (NRM03B102)
• Package Dimensions: 33.9 x 24.8 x 13.8 inch (NRM03B101), 33.9 x 24.8 x 12.2 inch (NRM03B102)
• Product Weight: 86.4 lbs (NRM03B101), 79.4 lbs (NRM03B102)

Product Usage Instructions

Installation Instructions:

1. Step 1: Open the carton and check the parts.
2. Step 2: Remove the original bumper and prepare installation parts.
3. Step 3: Splice the rear bumper according to model.
4. Step 4: Install the 4 Inch Led lights and Trailer Hitch.
5. Step 5: Install the Shackles.
6. Step 6: Install the Radar Probe if applicable.
7. Step 7: Install the license plate lights carefully.
8. Step 8: Install the key sensor securely.
9. Step 9: Install the original 7-way trailer plug wiring harness.
10. Step 10: Connect the Trailer plug wiring, 4inch Led lights, and Cable wires as per wiring diagram.

FAQ:

• Q: What tools are required for installation?
  A: Ratchet, Wrench, Allen Wrench, Safety Glasses

• Q: Are spare parts provided?
  A: Spare parts such as Bolts, Washers, Nuts, and Clips are provided with each piece.

• Q: What precautions should be taken during installation?
  A: Follow the installation steps carefully to avoid damaging components. Do not overtighten mounting bolts.

REAR BUMPER

User Manual

Thank you for purchasing the REAR BUMPER. Please read this manual care-fully and keep it properly if you need to refer to it afterward. If you need any sup-port or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.

WARNING
This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or proper-ty damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.

CAUTION
Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.

Parts Information

NOTE:
Spare parts such as B35、W22、W23、N15、B15、N14、B74、N11、B06 、 B75、W29、W28 and N24 are provided with 1PCS each (included in the number of parts details).

Installation Instructions

1. Step 1: Open the carton and take out the parts. Check whether the number of components is complete.

2. Step 2 : Remove the original bumper and prepare the parts needed to install the bumper.

3. Step 3: Splicing the rear bumper.

4. Step 4: Install the 4 Inch Led lights and Trailer Hitch.

5. Step 5: Install the Shackles.

6. Step 6: Install the Radar Probe.
   Note: If the car does not have a radar probe, this step can be ignored .

7. Step 7: Install the license plate lights.
   Note: DO NOT OVERTIGHTEN THE MOUNTING BOLTS OR YOU WILL BREAK THE LIGHT HOUSINGS. Tighten the bolts until the lights aren’t loose anymore and stop .

8. Step 8 : Install the key sensor.

9. Step 9: Install the original 7-way trailer plug wiring harness.

10. Step 10 : Connect the Trailer plug wiring, 4inch Led lights and Cabel wires.6

11. Step 11: Install the Rear Bumper.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>