BITMAIN AntMiner S19 XP Hyd Bitcoin Miner User Manual
- August 20, 2024
- BITMAIN
Table of Contents
BITMAIN AntMiner S19 XP Hyd Bitcoin Miner
Specifications
| Product Glance | Value |
|---|---|
| Model | S19 XP Hyd. |
| Version | k0-10 |
| Crypto algorithm/coins | SHA256 |
| Typical hash rate, TH/s(1-1) | 257 |
| Power on wall @35(1-2), Watt(1-1) | 5346 |
| Power efficiency on wall@35(1-2), J/T(1-1) | 20.8 |
Detailed Characteristics
Value
Power Supply Phase| 3
Input voltage, Volt(2-1)| 380~415
Input frequency range, Hz| 50~60
Input max current, Amp| 12
Network connection mode| RJ45 Ethernet 10/100M
Server size (lengthwidthheight, w/o package), mm| 410170209
Server size (lengthwidthheight, with the package), mm| 570316430
Net weight, kg| 12.8
Gross weight, kg| 14.1
Coolant flow, L/min Coolant pressure, bar Working
coolant(2-2)| 8.0~10.0 3.5
Coolant pH value Diameter of coolant pipe connector, mm| Antifreeze/ Pure
water/Deionized water Antifreeze: 7.0~9.0 Prue
water: 6.5~7.5 Deionized water8.5~9.5 OD10
Operation temperature range, °C| -20~70
Operation humidity(non-condensing), RH| 10~90%
Product Usage Instructions
Power Supply Connection
Connect the power supply to the server using the provided cable. Ensure the
input voltage is within the specified range (380-415V) for proper functioning.
Network Connection
Use an RJ45 Ethernet cable to connect the server to your network for
communication and data transfer.
Coolant System Setup
Ensure the coolant flow rate is between 8.0 to 10.0 L/min and the pressure
is maintained at 3.5 bar. Use the recommended coolant type based on the pH
value specified for optimal performance.
Operating Environment
Operate the server in a temperature range of -20°C to 70°C and maintain
humidity levels between 10% to 90% for efficient operation.
| Product Glance | Value |
|---|---|
| Model | S19 XP Hyd. |
| Version | k0-10 |
| Crypto algorithm/coins | **SHA256 |
| Typical hash rate, TH/s (1-1) | 257 |
| Power on wall @35℃(1-2), Watt (1-1) | 5346 |
| Power efficiency on wall@35℃(1-2), J/T (1-1) | 20.8 |
| Detailed Characteristics | Value |
Power Supply
Phase| 3
Input voltage, Volt (2-1)| 380~415
Input frequency range, Hz| 50~60
Input max current, Amp| 12
Hardware Configuration
Network connection mode| RJ45 Ethernet 10/100M
Server size (lengthwidthheight, w/o package), mm| 410170209
Server size (lengthwidthheight, with the package), mm| 570316430
Net weight, kg| 12.8
Gross weight, kg| 14.1
Environment Requirements
Inlet coolant temperature, °C| 20~40
Coolant flow, L/min| 8.0~10.0
Coolant pressure, bar| ≤ 3.5
Working coolant(2-2)| Antifreeze/ Pure
water/Deionized water
Coolant pH value
| Antifreeze: 7.0~9.0 Prue water: 6.5~7.5
Deionized water ： 8.5~9.5
Diameter of the coolant pipe connector, mm| OD10
Storage temperature, °C| -20~70
Operation humidity(non-condensing), RH| 10~90%
Notes
- The hash rate value, power on the wall, and power efficiency on the wall are all typical values. The actual hash rate value fluctuates by ±3%, and the actual power on the wall and power efficiency on the wall fluctuate by ±5%.
- Inlet coolant temperature.
- Caution: Wrong input voltage may cause server damage.
- For detailed working coolant use and maintenance instructions, please refer to “AARTSPACEHK3 Water Cooling Container & Dry-Wet Tower Product Manual”, Chapter 9, Article 3, Point 6, “Maintenance of Coolant”!
MORE INFORMATION
BITMAIN TECHNOLOGIES INC.
www.bitmain.com
FAQ
- Q: What is the typical hash rate of the S19 XP Hyd? model?
- A: The typical hash rate is 257 TH/s.
- Q: What are the supported crypto algorithms and coins for this model?
- A: The S19 XP Hyd. supports the SHA256 algorithm and coins like BTC, BCH, and BSV.
- Q: How should I clean the server for maintenance?
- A: Follow the cleaning instructions provided in the user manual to ensure proper maintenance of the server.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>