AUTOFREE NJL01G105-BX Inner Fender Liners User Manual
- June 1, 2024
- AUTOFREE
Table of Contents
AUTOFREE NJL01G105-BX Inner Fender Liners
Product Specifications
- Model: Fender Liner (Front + Rear)
- Material: Q235A
- Product Dimensions: Front – 36.22 x 19.68 x 9.05 inches, Rear – 38.52 x 18.86 x 7.78 inches
- Package Dimensions: 40.2 x 19.7 x 12.6 inches
- Product Weight: 36.8 lbs
Required Tools
- Socket
- Ratchet
- Allen Wrench
- Safety Glasses
- Tap Die Set
FENDER LINER
(FRONT + REAR)
User Manual
2018-2023 JEEP WRANGLER JL
| Model: | NJL01G105-BX NJL01G101B-BX |
|---|---|
| Material: | Q235A |
| Product Dimensions: | front: 36.22 x 19.68 x 9.05 inch |
rear: 38.52 x 18.86 x 7.78 inch
Package Dimensions:| 40.2 x 19.7 x 12.6 inch
Product Weight:| 36.8 lbs
Thank you for purchasing the fender liner (front + rear). Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
This product is designed primarily to enhance the appearance of the vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or proper-ty damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
CAUTION
Properly torque and recheck fasteners and security of step tread after 250
miles and inspect frequently. Do not use if damaged.
Parts Information
Note :
Spare parts such as B05、N09、B07、W09、W13、B15、W16、W19 are provided with 1PCS
each (included in the number of parts details).
Installation Instructions
-
Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
-
Step 2: Remove the original front fender flares and original front fender liner and prepare the parts needed to install the front fender liner.
-
Step 3: Install the front fender liner 2.
Note: There is only one mounting hole on the passenger side.
-
Step 4: Install the front fender liner 1.
-
Step 5: Install the front fender liner 3 or front fender liner 4.
Note: Please choose according to the situation of your car. -
Step 6: Tighten all the bolts and nuts.
-
Step 7: Installation of a front inner fender flares is complete. Please do periodic inspections of the inner fender flares to make sure that all hardware is secure and tight.
-
Step 8: Install the original front fender flares.
-
Step 9: Splice the rear fender liner 1 & rear fender liner 2.
NOTICE: Do not tighten the bolt in this step. -
Step 10: Splice the rear fender liners.
NOTICE: Do not tighten the bolts in this step. -
Step 11: Splice the rear fender liner.
-
Step 12: Tighten all the bolts and nuts.
-
Step 13: Installation of a rear fender liner is complete. Please do periodic inspections of the fear fenders to make sure that all hardware is secure and tight.
Note：Please choose according to the situation of your car -
Step 14: Install the original rear fender liner back on the car.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>