JOCCA 1602 Beard Set Instruction Manual
- June 12, 2024
- JOCCA
Table of Contents
JOCCA 1602 Beard Set Instruction Manual
DESCRIPTION
FACIAL CARE SET
PURCHASE ACKNOWLEDGEMENT
Thank you for your purchase we are confident that you will be satisfied with this item. customerservice@jocca.co.uk
PRODUCT DESCRIPTION
- Main body
- ON / OFF button
- Led screen
- 5D shaving head
- Trimmer head for nose and ears
- Facial cleansing brush
- Silicone brush
- Short hair head
SAFETY WARNINGS
-These instructions are highly important, please read this instruction manual before using the device and save it for future reference.
-JOCCA is only responsible for proper use of this product as describe in this manual.
-Before using the device for the first time, unpack and verify that it is in perfect condition, if not, do not use the device and go to JOCCA as the warranty covers all manufacturing defects.
-This product is only suitable for domestic use. Do not use the device outdoors. Do not leave the device upon exposure to outside factors such as rain, snow, sun, etc.
-This appliance can be used by children of 8 and above, and people with reduced physical, sensory or mental capabilities or lack of experience or knowledge if they are supervised or instructed in an appropriate and safe way about the use of the appliance and understand the hazards involved. Any cleaning and maintenance must be carried out by the user or if they are carried out by a child of 8 or above they must be supervised.
-Keep the appliance and its cable out of the reach of children under 8 years old.
-Children should be supervised to ensure they do not play with the device.
-If your appliance has been dropped or fallen into water or any other liquid do not use it or try to repair it. Contact to the JOCCA technical service department.
-Do not pull the cable to unplug the appliance from the mains, always pull from the plug.
-For your safety and for the appliance to work correctly, always use JOCCA spare parts and accessories.
-Do not immerse the appliance or any part of it in water or any other liquid.
-For your safety and for the appliance to work correctly, always use JOCCA spare parts and accessories.
-Do not leave the appliance on or near a hot gas or electric burner; next to a hot oven or a microwave oven.
-Never touch the cutting areas nor put these areas in contact with your skin as they are sharp.
-Never use the comb guides if they are damaged, broken or the comb teeth are damaged as this may be harmful.
-Do not use the hair clipper in the event of skin rash.
- Disconnect the appliance from the cable and / or charging stand before cleaning and if it does not work
- Do not use the appliance with wet hands and bare
- Remember that batteries must be deposited in specialized containers for collecting -If you want to dispose of the product, do not forget to remove the batteries from the device.
- Never place the battery compartment near fire or a source of
- The battery must be removed for safe
INSTRUCTIONS FOR USE
-Before using the appliance for the first time, please charge it fully.
-When the display of the device shows “05” the indicator light
will flash and indicates a low battery status.
-Proceed to load the appliance as indicated below. (FIG.1)
-This device has a travel lock. To activate it, press and hold the ON button for 3 seconds. Then the LED display of the shaver will show that the block has been activated.
- Repeat the previous step to (FIG.2)
-This device has 5 interchangeable heads.
- 5D shavingTurn on the appliance and use it as indicated below. (FIG.3)
-For a better shave of the head it is advisable to wash the head and dry the hair. If necessary, clean the head with a brush.
-When the electric shaver is overloaded, it will automatically shut down and the LED display will indicate. At this time, it should be clean before use.
-When the faucet symbol flashes on the LED display, it indicates that the electric shaver needs to be cleaned. (FIG.4)
-To clean the shaving heads, clamp the sides and lift the piece, then put it under the tap.
NOTE: DO NOT IMMERSE IN WATER FOR A LONG TIME.
DO NOT DRY / CLEAN THE HEAD WITH PAPER OR CLOTH, IT MAY DAMAGE THE PRODUCT.
-Once finished shaving, cover the head with the protective cap to prevent damage. - Trimmer head for nose and ears-Before trimming the hair, clean both the nasal canal and the ear if with wax. -Turn on the appliance and use it as indicated below. (FIG.5)
- Facial cleansing Removes excess sebum and dirt from the face. Don’t clean your face directly with a dry facial cleanser, it may irritate the skin. (FIG.7)
- Silicone brush
- The silico n e material, with a soft and delicate texture, adapts well to the skin and cleanses the (FIG.7)
- Short hair head
-Trims and shapes facial hair. (FIG.8)
CLEANING AND STORAGE
-Do not use abrasive detergents or products that could damage the appliance. Simply clean the surface with a wet cloth.
-DO NOT IMMERSE THE APPLIANCE IN WATER OR ANY OTHER LIQUID.
- After use, turn off the appliance and remove the head, note that the body of this machine should not be immersed in
- Accessories can be washed with water, as long as it does not exceed 60ºC. After cleaning, allow to air
- Regular cleaning of accessories helps to extend the useful
TECHNICAL DATA 3,7V
600mAh lithium polymer battery Charge 5V 1A (by USB)
This device conforms to the safety requirements and provisions of directive
2014/30/EU on Electromagnetic Compatibility.
PRODUCT RECYCLING – ENVIROMENT
Packaging
The materials used in the packaging of this product are handed in a system of
waste collection, sorting and recycling. If you wish to dispose of these
materials, you should use rubbish bins or other
recycling facilities appropriate for each type of material.
Electrical and Electronic Product
This symbol means that if you wish to dispose of this product at the end of
its life, you must take it to a waste collection company authorized for the
selective collection of Waste Electronic and Electrical Equipment (WEEE). This
product does not
contain concentrations of materials considered harmful to the environment.
HOW TO REMOVE THE BATTERIES:
If the product contains any batteries, they must be removed before disposing
of the product. Follow the steps: Make sure the batteries are completely
discharged before proceeding to removal. The appliance must be disconnected
from the power supply when the batteries are removed.
-To remove the batteries, once the life cycle of the device is over, proceed as follows:
-Open the compartment, previously removing the fixing screws with a screwdriver.
-Identify the battery and cut its cables (Red and Black). In order to avoid risks of a short circuit with the possible residual charge of the battery, first cut the Red cable and protect its conductive part with insulating tape, then proceed to cut the Black cable proceeding in the same way.
- Safely remove the battery. Remember that batteries must be deposited in special authorized
PROTECTION OF THE ENVIROMENT DIRECTIVE 2012/96/EC
This product has been designed and manufactured with high quality materials and components that can be recycled and reused. When you see the symbol of a crossed out litter bin on wheels next to a product, this means that the product conforms to the European Directive 2012/96/EC. Please obtain information about the local recycling system for electric and electronic products. Follow the local rules and do not dispose of used products by throwing them in the normal bins at home. Proper recycling of your used product will help avoid negative impacts on the environment and people’s health.