Sharper Image MC0594 Firming Gloves User Manual
- June 1, 2024
- Sharper Image
Table of Contents
MC0594
Firming Gloves
USER MANUAL
PLEASE READ CAREFULLY THIS INSTURCTION BEFORE USING THE PRODUCT
PRODUCT INTRODUCTION
Muscle Electrical Stimulation Gloves is an alternative to the cosmetic
apparatus. You can achieve muscle contraction in your face and body with a
simple touch of your hand.
With gloves, you can easily process any part of your body and face, even
affecting areas that are difficult to access for ordinary devices. The highly
conductive material of which the gloves are made provides maximum microcurrent
efficiency.
The gloves are cordless they are more convenient and efficient to use
THE SET INCLUDING
A. 1 pair of eGloves
B. 2 electric devices
C. 1 twin head charging cable
PRECAUTIONS FOR USE
- When you are not using it, turn the power off before removing it from your face
- The device is not waterproof. Do not use in a location that is high humid or where water may get on it.
- Never use damaged, deteriorated or dirty gel pads, otherwise it may make you feel pain/ burned.
- Remove any jewelry or accessories such as necklaces, belts and pierced earrings when using this product. Not doing so may result in an accident, injury, or damage.
- Keep electronic devices, such as wristwatches, pedometers, cell phones, etc., away from your body during use. Not doing so may result in malfunction of the electronic device.
- Clean the face before use.
- The product is not waterproof. Do not use in a location that is high humid or where water may get on it.
KNOW YOUR PRODUCT
CHARGE THE BATTERY
- Take out the charging cable and plug the micro USB head into the bottom of the both devices, the other end of USB head need to plug into a USB Adaptor with 5V 1A.
- Then the charging light will light up in red. Charge for 20 mins, then it will turn into blue LED.
Different Mode Introduction
| Mode | Mode 1 | Mode 2 | Mode 3 | Mode 4 | Mode 5 |
|---|---|---|---|---|---|
| Color of LED | green | pink | yellow | Blue | white |
|  | |||||
| Waveform Sensation | 1 sensation | 4 changes in | |||
| sensation | 4 changes in | ||||
| sensation | 11 changes in | ||||
| sensation | 11 changes in |
sensation
How to use
- Connect the device on the gloves with the magnet snap button.
- Then wear the gloves, press and hold the mode button for 3 seconds to turn on the device, the indicating light will be light up
- Then you can select the
button to select the suitable mode that you want to treat. There are a total of 10 EMS intensity levels (1 to 10). Then press again the <+/-> button to select the intensity of the massage level. - Then touch your body where you want to massage.
- Suggest increase the intensity by gradually, in order to feel which intensity level is suitable for your need.
- The device with 20 minutes auto timer, once the intensity selected, the device will be auto count down, and will be auto off after 20 minutes.
- You can off the device anytime during using by press and hold the
key for 3 seconds till the power light is off. 
ATTENTION:
- Use the weakest level when first use. Then adjust the intensity level slowly up to your desired level.
- When the battery is going weak, the EMS impulse will get weaker. If the battery is running out, the power light will be OFF or all buttons do not work well when using properly. Replace the battery with a new one.
MAINTENANCE
- Always keep clean the main device, by using a soft cloth to clean the surface of the unit.
- Do not spill liquid on the device or immerse the device in water
- Keep the product in a cool, dark place but NOT hot or humid location
- Do not clean with chemicals
- Keep out of the reach of children and store away from pets
- Gloves remove the device and clean with a damp cloth, let it dry by natural blow.
PRODUCT SPECIFICATION
| Product Number | MCO594 |
|---|---|
| Initial Curve Shape | Biphase Square-wave pulse |
| Max. EMS Current | 50mA |
| Pulse Frequency | 1 — 33.3Hz |
| Range of Output Voltage | 18.2V — 61.2V Load Resistance 1K0 |
| Li-ion battery capacity | 3.7V 60 mAH |
| Charging Voltage | 5V USB 1A |
| Treatment Time | 20 minutes auto off |
| Intensity | Adjustable from 1-10 Levels of each mode |
| Mode | 5 modes |
| Operation Conditions: | 10°C-40°C (50°F-104°F) ; 30-85% RH |
| Storage Conditions | -10°C-50°C (14°F-122°F) ; 10-95% RH |
| Charging time | 20 mins can last for 1 hour |
TROUBLE-SHOOTING
| Problem | Cause | Rectification |
|---|---|---|
| No Led Light Up | – Low battery | – Charge the battery |
| With Led Indication Light But No Feeling | – Device is not snapped on |
gloves firmly
– Intensity level at 0
– Microprocessor hang up| – Check that device is connected firmly with both
magnetic snap button of the electrode gloves
– Push M button to turn on the device and press + to increase intensity
– Reset by turn off the device and turn it on after 1 min.
All Button Does Not Work Well| – Microprocessor hang up| – Reset by turn off
the device and turn it on after 1 min.
Device Off Automatically| – Low Battery| – Charge the battery
MC0594 English 11.6.2022