Guldmann Rail Curves Set Instruction Manual
- June 1, 2024
- Guldmann
Table of Contents
Guldmann Rail Curves Set Instruction Manual
Rail curves
Rail curves are used where it is necessary to change the direction of the rail in a single rail system.
Rail curves are available in angles of 30°, 45°, 60° and 90°. All the curves have a centre radius of 500 mm.
As a minimum three brackets must be used to mount all rail curves – one of the brackets must always be placed in the centre of the curve.
Combinations of rail curves
There are many possible combinations of rail curves. All standard curves end
in a 500 mm straight rail. The dimensions given are absolutely minimum
dimensions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>