ELMAG WPMH 30 Hydraulic Workshop Press User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG WPMH 30 Hydraulic Workshop Press
Product Usage Instructions
Safety Precautions
- Always wear appropriate safety gear, such as gloves and eye protection, when operating the hydraulic workshop press.
Setup
- Place the press on a stable and level surface.
- Ensure all components are properly connected and secured.
Operation
- Adjust the pressure settings as needed for your task.
- Use the handpump or foot pedal to activate the press.
- Monitor the compression gauge to ensure safe operation.
Maintenance
- Regularly check for any leaks or damage to the hydraulic system.
- Keep the press clean and well-lubricated for optimal performance.
FAQ
- Q: How do I adjust the pressure settings on the hydraulic workshop press?
- A: To adjust the pressure settings, use the controls provided on the press to increase or decrease the hydraulic pressure.
- Q: Can I use the press for bending metal?
- A: Yes, the hydraulic workshop press can be used for bending metal with the appropriate tools and setup.
HYDRAULIC WORKSHOP PRESS PREMIUM WPMH 30
- Article Number: 81801
- EAN Code: 9004853818011
TECHNICAL FACTS
- With foot pedal and hand pump
- Hydraulic cylinder laterally adjustable
- Fine adjustment of compression pressure
- Manual hydraulic presses
- Bending and aligning axes, shafts and profiles
- Pressing in/driving out bearings, bushes, pins, shafts, keyways
- Pressing pipes
- Punching with special punches
- Very good suitability for stress tests, material and weld seam tests
- Inlet sizes of max. 550 x 550 to max. 790 x 1,030 mm
- Hole guide frame with locking pin for press table adjustment
- Single models with press table winch for manual height adjustment
- Hydraulic cylinder with longitudinal movement
- Pressure build-up through hand pump, very precise hydraulic system
- Manual changeover between idling and working speed
- Automatic piston return
- Overload safety valve
- Compression gauge
- Chrome-plated cylinder piston
- Two-piece press table support with support blocks in a V-shape
- Robust welded construction
PRODUCT HIGHLIGHTS
Standard features
- Overload safety valve
- Compression gauge
- Chrome-plated cylinder piston
- Press the table with the locking pin
- Support blocks in V shape
- Operating instructions / CE
SPECIFICATIONS
press power max.| 30 t
hydraulic drive handpump| Yes
foot pedal for the pump| Yes
two drive speeds| Yes
automatic piston return| Yes
hydraulic cylinder laterally adjustable| Yes
pillar model| Yes
machine height| 2010 mm
machine length without a pump| 685 mm
machine width| 643 mm
inlet length| 565 mm
beam width inside| 230 mm
inlet height min. / max.| 1082 mm
Piston stroke| 160 mm
machine length with pump| 836 mm
Weight| 165 kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>