dji AVATA 2 Fly More Combo User Guide
- June 1, 2024
- DJi
Table of Contents
dji AVATA 2 Fly More Combo User Guide
Charge to activate the Intelligent Flight Battery before using for the first time.
Check battery level: press once.
Power on/off: press, then press and hold.
Connect the USB-C port of the goggles to the mobile device with the USB-C OTG cable and a suitable data cable. Run DJI Fly on the mobile device and follow the prompts to activate the DJI devices.
1) Lock Button
♦ Takeoff : Press twice to start the aircraft motors, then press and hold
to make the aircraft take off. The aircraft will ascend to approximately 1.2 m
and hover.
♦ Landing : While the aircraft is hovering, press and hold to land the
aircraft and stop the motors.
♦ Brake : press during flight to make the aircraft brake and hover in
place.
2) Joystick
Move up or down to make the aircraft ascend or descend.
Move left or right to make the aircraft horizontally move left or right.
3) Accelerator
Fly the aircraft forward/backward: Press the accelerator down until the
aircraft begins to fly in the direction of the circle in the goggles. Push the
accelerator forward to fly the aircraft backward. Release to stop and hover.
WE ARE HERE FOR YOU
Contact
DJI SUPPORT
<https://www.dji.com/avata-2/downloads>SUBSCRIBE FOR MORE INFO
This content is subject to change without prior notice.
DJI and DJI AVATA are trademarks of DJI.
Copyright 2024 DJI All Rights Reserved.
YCBZSS00275303