Microsoft 17810010 Merchandisers Motor Fan EVAP Kits Installation Guide
- June 1, 2024
- Microsoft
Table of Contents
Microsoft 17810010 Merchandisers Motor Fan EVAP Kits
Product Information
Specifications
- Model Number: 17810010
- Product Name: Fan Motor Bracket
- Installation: Requires assembly onto the evaporator cover
- Material: Metal
- Compatibility: Designed for specific fan motors
Product Usage Instructions
Step 1: Prepare for Installation
- Add approximately by hand within 4 red boxes 6.5 through-hole for installing fan bracket, with dimensions according to the fan bracket in photo 1.
Step 2: Install Motor and Fan Blade
- Install the motor onto the fan bracket and secure it with machine screws.
- Install the fan blade onto the motor.
Step 3: Attach the Fan Assembly to Evaporator Cover
- Install the fan bracket with the motor/blades onto the evaporator cover and secure it with machine screws (photo 6).
- Apply sealing glue around the screws to prevent rust on the screw holes.
Step 4: Finalize Installation
- Install the fan motor cover on the front of the evaporator cover and secure it with machine screws.
- Apply sealing glue around the screws to prevent rust on the screw holes.
- Install the evaporator cover kit on the top of the unit and secure it with stainless steel screws as shown in photo 9.
Reference for fixing methods on both sides (Photo 9): Left, Right
FAQ
- Q: Is this fan motor bracket compatible with all types of fan motors?
- A: No, this fan motor bracket is designed for specific fan motors, please check compatibility before purchase.
- Q: Do I need any special tools for installation?
- A: Basic tools like a screwdriver may be required for installation, refer to the user manual for detailed instructions.
Installation Instructions
17810010 ( fan motor bracket）
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>