CUBE V1.2402 Longtail Hybrid Instruction Manual
- June 1, 2024
- CUBE
Table of Contents
CUBE V1.2402 Longtail Hybrid
GENERAL
READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the
assembly,initial operation, and maintenance of the product.
Read all enclosed instructions carefully before assembling or using the
product, especially the general safety instructions. Non-observance of this
manual may result in serious injury or damage to the product itself and your
vehicle. Keep the enclosed instructions close to hand for further use. If you
pass on the product or the vehicle equipped with the product to a third
party,always include all accompanying instructions.
The enclosed instructions are subject to European legislation. If the product
or vehicle is delivered outside Europe, the manufacturer/importer may have to
provide additional instructions.
EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions,
on the product or on the packaging.
WARNING!
A medium risk of hazard which may result in death or serious injury if not
avoided.
CAUTION!
A low risk of hazard which may result in moderate or minor injury if not
avoided.
NOTICE!
Warning of possible damage to property.
Useful additional information for assembly or operation.
Read and observe the enclosed instructions.
Reference to further documentation – See instructions (Doc. – Number)
NM Use a torque wrench. Use the torque values indicated in the symbol.
Observe indication sound.
SAFETY INSTRUCTIONS FOR ACCESSORIES
WARNING!
Intended use
Use the product only as described in these instructions. Any other use is
considered improper and may cause accidents, serious injuries or damage to the
product or e-bike.
The product is an accessory for mounting on compatible e-bikes from the CUBE
Longtail Hybrid model series. It serves as a foot support for transported
children/passengers. The product is not designed as a standing surface, i.e.
children must not stand with their full weight on one or both footboards.
- The children transportation accessories for the CUBE Longtail Hybrid include the following individual parts: Top rail ( item no. 94760), seat set (item no. 94762), footboards(item no. 94761) and side guard (item no. 94763).
- Never use the product without the supplied additional accessories. When transporting children/passengers with the CUBE Longtail Hybrid, all accessories for transporting children must always be installed correctly and professionally.
- Please observe all information relating to intended use. Do not assemble or use the product in a way other than described here or in a way that is not intended.
- The manufacturer or dealer shall not assume any liability for damage caused by improper or incorrect use.
- Do not use the product with other (incompatible) e-bikes/bikes.
- If necessary, contact your specialist dealer for information on whether the product is compatible with your e-bike.
Safety instructions for assembly
We at CUBE strongly recommend that you have this product assembled by your
dealer.
Improper assembly or an incorrect assembly sequence can result in serious falls. If the product is not fitted to the e-bike correctly, there is a risk of accident and injury for you and/or the children/passengers being transported.
- If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
- Make sure that your e-bike is suitable for fitting the product.
- Do not make any structural modifications to the product.
- Screw connections must be tightened correctly with a torque wrench and with correct torque values. If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.
Safety Instructions for Operation
Please note that the additional weight of accessories can change the riding
characteristics of your e-bike, especially the steering and braking behaviour.
- Adapt your riding style to the change in handling characteristics.
- Note the information on the maximum load capacity of the product.
- Note the information on the maximum permissible total weight of the e-bike.
- Never attach a trailer or saddlebags, etc. to the product.
- Make sure that children do not stand with their full weight on one or both footboards.
Safety instructions for maintenance
Prevent malfunctions due to excessive wear, material fatigue or loose screw
connections:
- Check the product and your vehicle regularly.
- Do not use the product and your vehicle if you notice excessive wear or loose screw connections.
- Do not use the vehicle if you notice cracks, deformation or color changes.
- Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes.
CLEANING AND CARE
NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.
- Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces and the product.
Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.
STORAGE
All parts must be completely dry before storage.
- Always store the product in a dry place.
- Protect the product from direct sunlight.
DISPOSAL
Dispose of the packaging according to its type. Add cardboard and cartons to your waste paper collection, and films and plastic parts to your recyclables collection.
Dispose of the product in accordance with the laws and regulations valid in your country.
LIABILITY FOR MATERIAL DEFECTS
If there are any defects, please contact the dealer from whom you purchased
the product.
In order to ensure that your complaint is processed smoothly, it is necessary
for you to present proof of purchase and proof of inspection.
Please keep them in a safe place.
To ensure a long service life and durability of your product or your vehicle,
you may only use it in accordance with its intended purpose. It is essential
that you observe the information in the operating instructions of your
vehicle.
Furthermore, the installation instructions (especially torques for screws) and
the prescribed maintenance intervals must be observed.
OTHER INFORMATION
Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information and the latest versions of our manuals as well as the addresses of our specialist dealers.
Designation
No. | Designation | Num- ber |
---|---|---|
1 | Right board | 1× |
2 | Left board | 1× |
3 | Right bar | 1× |
4 | Left bar | 1× |
5 | Screw M6×30 | 6× |
6 | Self-locking nut | 6× |
7 | Screw M5×16 | 4× |
8 | Screw M6×40 | 2× |
A: Mount the right board 1 to the right bar 3using three bolts 5 and nuts 6.
IMPORTANT: The rough side of the board is the top side.
Then mount the left board 2 to the left bar 4using three bolts 5 and nuts 6.
Torque: 3 Nm
B: Attach assembled products to B the right and left of the luggage rack.
Secure the products at the top first of all.
In order to secure the product,open the bracket, place it around the
corresponding bar on the luggage rack, close and fix in place using the screw
7.
Torque: 8 Nm
Then secure each of the products on both sides of the luggage rack at the
bottom with one screw 8.
Torque: 6 Nm