CUBE Kickstand FM Flat Mount Cycling Instruction Manual

October 30, 2023
CUBE

CUBE logo PENDING SYSTEM GMBH & CO.
KG Ludwig-HLittner-Str. 5-7 D-95679 Waldershof
MONTAGE- UND BEDIENUNGSANLEITUNG / ASSEMBLY INSTRUCTION AND MANUAL
CUBE Kickstand FM Flat Mount Cycling

Kickstand FM Flat Mount Cycling

  1. x 1 Fahrradständer
    Kickstand

  2. x 1 Gewindeplatte
    Threaded plate

  3. x 2 Schraube M5 x 20 mm
    Screw M5 x 20 mm 4 mm

  4. x 2 Beilagscheiben M5
    Washer M5

**** Bitte beachten Sie, dass sich bei der Verwendung von Hinterbauständern der Einsatzbereich des Fahrrades immer auf Einsatzkategorie 2 verändert.
Please note when using the kickstand, the application area of the bike model always changes to classification category 2.CUBE Kickstand FM Flat Mount
Cycling - Hinterbauständern

GENERAL

READ AND KEEP THE MANUAL

This and other accompanying instructions contain important information on the assembly, initial operation, and maintenance of the product. Carefully read all instructions and the information on the packaging, especially the general safety information, before installing or using the product. Non-observance of this manual may result in serious injury or damage to the product itself and your vehicle. Keep the enclosed instructions close to hand for further use. If you pass on the product or the vehicle equipped with
the product to a third party, always include all accompanying instructions.
We at CUBE strongly recommend that you have this product assembled by your dealer.
The enclosed instructions are subject to European legislation. If the product or vehicle is delivered outside Europe, the manufacturer/importer may have to provide additional instructions.
EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions, on the product or on the packaging.
**WARNING!
A medium risk of hazard which may result in death or serious injury if not avoided.
CAUTION!
A low risk of hazard which may result in moderate or minor injury if not avoided.
NOTICE!
Warning of possible damage to property.
**
Useful additional information for assembly or operation.
Read and observe the enclosed instructions.
Use a torque wrench. Use the torque values indicated in the symbol.

INTENDED USE

This product is exclusively intended for installation on approved vehicles. Only compatible and approved accessories that have an appropriate interface may be installed on this product. If you are not certain, please contact your specialist dealer. Only use the product as described in these instructions. Any other use is considered improper and may lead to accidents, serious injuries or damage to the vehicle. The product is not a toy. The manufacturer or dealer assumes no liability for damage resulting from unintended or incorrect use.

SAFETY INSTRUCTIONS FOR ACCESS0RIES

WARNING!
Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety instructions and instructions can cause accidents, serious injury and damage.
Safety of children
If children play with the packaging or small parts, they may swallow them and suffocate or injure themselves.

  • Keep small parts away from children.
  • Do not let children play with the packaging or product.
  •  Do not leave the product or vehicle unattended during assembly.

Safety instructions for assembly

  • Check whether your vehicle is suitable for the installation of this product. If you are not certain, please contact your specialist dealer.
  • Before assembly, check the scope of delivery of the product for completeness.
  • Before assembly, check all components of the product and the vehicle for damage, sharp edges or burrs.
  • If the scope of delivery for the product is not complete or if you notice any damage, sharp edges or burrs on the product, components or vehicle, do not use it.
  • Have the product and the vehicle checked by your dealer.
  • If you are uncertain or do not have the ne- cessary knowledge, have your specialist dealer install the product.
  • Make sure your vehicle is suitable for the retrofitting of a kickstand.
  • Do not make any structural changes to the product.
  • Use only parts and accessories intended for the product. Components from other manufacturers may affect optimal function.
  • Screw connections must be tightened correctly with a torque wrench and with correct torque values.
  •  If you are not experienced in using a torque wrench or do not have a suitable torque wrench, have loose screw connections checked by your dealer.

Safety Instructions for Operation
Please note that accessories can have a significant influence on the characteristics of the vehicle.

  • If you are not absolutely sure or if you have questions, please contact your dealer.

  • The enclosed instructions cannot cover every possible combination of the product with all vehicle models.

  • Observe the instructions on the packaging
    – to approved vehicles
    – to approved wheel sizes
    – to the maximum load capacity of the product

  • Observe the specifications regarding the maximum permissible total weight of the vehicle.

  • The additional weight may change the driving properties of your vehicle, in particular the steering and braking behaviour.
    Adapt your driving style to the changed dri- ving properties.

Safety instructions for maintenance
Prevent malfunctions due to excessive wear, material fatigue or loose screw connections:

  • Check the product, the accessories used, and your vehicle regularly.
  • Do not use the product, accessories used, and your vehicle if you discover excessive wear or loose screw connections.
  • Do not use the vehicle if you notice cracks, deformation or color changes.
  •  Have the vehicle inspected immediately by your dealer if you notice excessive wear, loose screw connections, deformation, cracks or color changes.

CLEANING AND CARE

NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.
» Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as  knives, hard spatulas and the like. Thesecan damage the surfaces and the product. Clean the product regularly with water (add a mild detergent if necessary) and a soft cloth.

STORAGE

All parts must be completely dry before storage.

  • Always store the product in a dry place.
  • Protect the product from direct sunlight.

DISPOSAL

**** Dispose of the packaging according to its type. Add cardboard and cartons  to your waste paper collection, and films and plastic parts to your recyclables collection.
Dispose of the product in accordance with the laws and regulations valid in your country.

LIABILITY FOR MATERIAL DEFECTS

If there are any defects, please contact the dealer from whom you purchased the product.
In order to ensure that your complaint is processed smoothly, it is necessary for you to present proof of purchase and proof of inspection.
Please keep them in a safe place.
To ensure a long service life and durability of your product or your vehicle, you may only use it in accordance with its intended purpose.
Please note when using the kickstand, the application area of the bike model always changes to classification category 2.
It is essential that you observe the information in the operating instructions of your vehicle.
Furthermore, the installation instructions (especially torques for screws) and the prescribed maintenance intervals must be observed.

OTHER INFORMATION

**** Please visit us occasionally on our website at www.CUBE.eu. There you will find news, information and the latest versions of our manuals as well as the addresses of our specialist dealers.

Pending System GmbH & Co. KG
Ludwig-Hüttner-Str. 5-7
D-95679 Waldershof
+49 (0)9231 97 007 80
www.cube.euwww.cube.eu/service/manuals/
MONTAGE- UND BEDIENUNGSANLEITUNG für Fahrradständer FM /
ASSEMBLY INSTRUCTION AND MANUAL for Kickstand FM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals