Blushield T1 Ultimate Portable Smart Meters User Guide
- June 1, 2024
- Blushield
Table of Contents
Blushield T1 Ultimate Portable Smart Meters User Guide
Product Overview
Power on the T1 by holding down the switch A) for 3 seconds it will power on. The power indicator B will light up green indicating that the T1 is on and active.
To turn off the T1 hold down the switch A for 3 seconds and the T1 will switch off.
When on the LED indicator B will be constantly on. This is the normal function mode of the T1.
To protect your T1 from scratches and knocks you can purchase a leather pouch made by us to help keep your T1 in pristine condition. Available in Blue and Black.
Please ask your distributor for more information.
A ON/OFF button
B Red/Green LED indicating function/charge
C USB Ccharging port
TheT1 carries a limited warranty for a period of 1 year. This does not cover misuse, modification or neglect (dropping, water damage). If a claim s to be made all postage costs are to be covered by the customer. A Blushield distributor will decide whether to repair o replace product depending upon the fault.
Itis not recommended to charge the portable for more than the required time. Once the indicator light B stops flashing the unit can be unplugged and used as required. A single charge will enable the portable to be used for up to 2 days (depending on useage) before needing to be charged again. This product meets all FCC safety standards and can be safely used on a plane or any aircraft with confidence,
This product is not water proof as with all electronic products this is not
covered by warranty. Full submersion in water is more than likely to
permanently damage your T1
Upon receiving your T1 please first charge it fully using the USB C cable provided. Insert the small end of the USB cable into the USB
C port C making sure not to force it in. Forcing the plug in may damage the USB C port. The larger end of the cable (USB A) can be inserted into a USB socket on your computer or any USB type phone charger will do. A USB charger is not supplied with yourT1.
The T1 will take from 2 to 4 hours to charge fully, this will depend upon the
charger used. Fast chargers will not work with the Tisousea 1amp or 2 amp
charg
Once the USB charging head is inserted A the LED B will flash red indicating that the Tiis chargin
Fast flashing red light = battery is low Slower flashing red light = charging more than halfway No flashing light = fully charged
Green static light =T1 is on Nolight =T1 is off
Allow 2 to 4 hours for your T1 to charge fully. Once fully charged the red LED B will no longer flash, indicating a full charge. A single charge may last up to 1 to 2 days, depend- ing upon useage.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>