Blushield Phi Series Φ1 Portable Radiation Protection Instructions
- June 1, 2024
- Blushield
Table of Contents
Blushield Phi Series Φ1 Portable Radiation Protection
Quick Start Guide
-
Power on the 01 by holding down the switch 0 for 3 seconds it will power on. The power indicator (E) will light up green indicating that the 01 is on and active.
-
To turn off the 01 hold down the switch for 3 seconds and the 01 will switch off.
-
When on the LED indicator@ will be constantly on. This is the normal function mode of the 01.
-
To protect your 01 from scratches and knocks you can purchase a leather pouch made by us to help keep your 01 in pristine condition. Available in Blue and Black.
-
Please ask your distributor for more information.
-
The 01 carries a limited warranty for a period of 1 year. This does not cover misuse, modification or neglect (dropping, water damage). If a claim is to be made all postage costs are to be covered by the customer. A
-
Blushield distributor will decide whether to repair or replace product depending upon the fault.
-
It is not recommended to charge the portable for more than the required time. Once the indicator light@stops flashing the unit can be unplugged and used as required. A single charge will enable the portable to be used for up to 2 days (depending on useage) before needing to be charged again. This product meets all FCC safety standards and can be safely used on a plane or any aircraft with confidence.
-
This product is not water proof as with all electronic products this is not covered by warranty. Full submersion in water is more than likely to permanently damage your 01
-
A USB C charging port
-
B Power button
-
C 01 Logo
-
D Hole for key loop
-
E Function indicator
Upon receiving your 01 please first charge it fully using the USB C cable
provided. Insert the small end of the USB cable into the USB C port 6} making
sure not to force it in.
Forcing the plug in may damage the USB C port. The larger end of the cable
(USB A) can be inserted into a USB socket on your computer or any USB type
phone charger will do. A USB charger is not supplied with your 01.
- The 01 will take from 2 to 4 hours to charge fully, this will depend upon the charger used. Fast chargers will not work with the 01 so use a 1 amp or 2 amp charger.
- A single charge may last up to 1 to 2 days, depending upon useage.
A USB C plug end- B Power button
- C USB charger end
During Charging
Fast flashing red light= battery is low Slower flashing red light charging more than halfway
- No flashing light= fully charged Green static light= 01 is on
- No light= 01 is off
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>