Blushield B1 Premium Cube User Guide

: June 1, 2024
: Blushield

Table of Contents

Blushield B1 Premium Cube
OVERVIEW
PRODUCT USING INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Blushield B1 Premium Cube

OVERVIEW

A Cube soc
ket
B LED indicator light
C Logo
D Logo

PRODUCT USING INSTRUCTION

Using the included power supply, select a suitable place to plug in the B1.
Preferably plug the B1 in a central area within your home or office.
Only use the included power supply as other third-party power supplies may have the wrong voltage or polarity, potentially damaging the B1 beyond repair.
Using incorrect power supplies will void the warranty.
DO NOT place the Cube in damp areas or bathrooms as there may be a risk of electric shock
DO NOT use force to insert the power plug into the socket
DO NOT attempt to modify or open the case, this will void the warranty and you may risk electric shock
DO NOT try to charge the unit as it does not contain any battery
DO NOT place the B1 on an unstable surface
- AIRPLANE SAFE
- Wi-Fi SAFE
- MOBILE SAFE
- AUTOMOBILE SAFE
- 5G SAFE
Place out of reach of young children, and keep the power cord tucked away to avoid children pulling on it or household pets from chewing on the wire.
There is a risk of electric shock if the cord is broken.
Some people report that within the initial first few days after installing the B1, they feel low in energy or tired. This is a harmless transient condition and will pass. This is the body adapting to a new environment.
Persist with this until it passes. Older persons who have poor health may take longer to adapt, this is a normal process as the body adapts to a new environment.
The B1 does not remove EMF nor does it modity EMF. Using an EMF meter will not indicate any change in the environment.
After you install the B1 the numbers on any EMF meter will not alter, as their sole purpose is to measure electro-magnetic fields.
B1 DOES NOT interfere with wireless devices
B1 DOES NOT block any mobile phone or

Wi-Fi signals

B1 DOES NOT interfere with pacemaker use
B1 DOES NOT cause electronic devices to stop working
The B1 is strictly for interior use only. It carries a warranty for one year.
This covers factory defects or faults. The warranty does not cover misuse, modification, neglect (water damage) or opening of the case. The warranty does not cover wear and tear on the power plug cord.
If a claim is made all postage costs are to be covered by the customer. A Blushield distributor will decide whether to repair or replace the product depending on the fault.

CAUTION RISK OF ELECTRIC SHOCK:

For interior use only. Do not use it in damp or humid areas.

A Cube Socket
B Power supply
C Power plug

Once the power plug is inserted you will observe the LED indicator light up red. If you fail to see a small red light at the hole make sure the power supply is turned on at the wall, and check that the power plug is firmly in the socket. Do not force the plug. www.blushield-us.com.