MELIPRON GMC Savana Adjustable Ladder Roof Rack with Rear Roller Instruction Manual

MELIPRON GMC Savana Adjustable Ladder Roof Rack with Rear Roller

WARNING!

• Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions may result in property damage, serious bodily injury, or death. We are not responsible for any property
  damage, personal injury, or death occurred while using any products. Retain these instructions for future reference.

• Any modification or unintended use of this product voids any warranty and could create a hazardous condition.

• Loads must be secure according to local height and deification regulations and or laws.

• Secured loads and connections must be re-checked periodically for tightness.

• In order to prevent installation problems, any consultation or use of certified installer or installation service company is recommended.

FOR WAREHOUSE USE

• Part#: C298V02
• Material: Steel
• Fitment: Full-size Cargo Van

REQUIRED TOOLS

PRODUCT DESCRIPTION

• MODEL NUMBER C298V02
• INCLUDES Three bar Heavy-duty Rain-Gutter Roof Rack Rear Cargo Roller
• DESCRIPTION
  • C298V02 features 350 Lb Per Bar weight-tested capacity and Rea Cargo Roller. Each square bar forged with a Gauge No 10 Steel. The unit is powder coated with weather-resistant paint it also comes with protective rubber cover on the clamps . Built to work and last .
  • Rear Cargo Roller saves you the hassle of loading heavy bulky items onto the roof and makes the loading more securer and faster.

PART LIST

INSTALLATION DIAGRAM

Installation Direction Of Rain-Gutter Roof Rack

• STEP 1
  • **The front & rear bar installation

**

  *  **Middle-bar installation

**

• STEP 2
  • Install Rubber Blanket to protect the roof.
  • Use a ladder or any assistance tools, put the assembled rack set onto the vehicle’s roof. Be careful!
  • Install the assembled rack set on the roof (TIP: For Three-Bar, please begin with the front and rear Mounting Base set for the better stability of the system.)

• **STEP 3

**

• STEP4
  • For Three-Bar set assembly. Using tape measure, adjust the middle bar to parallel the front and rear bar.
  • Tighten all the screws

Installation Direction Of Rear Cargo Roller

• STEP 5
  • Connet Support Arm & Rear Roller Cross-Bar.
  • Set two Safety Pin insert into holes both on Rear Roller Cross-Bar.

• **STEP 6

**

• **ASSEMBLY COMPLETION

**
Thank you for your purchase. We hope you enjoy the product with us. Your satisfaction is our first priority. If you have any problem with the product, please contact us. Thanks for your time.
Our customer service team will do their best to make it right. We appreciate your order and look forward to serving you again.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>