Home it V200 Smart Wi-Fi Camera User Manual
- June 1, 2024
- Home-it
Table of Contents
Home it V200 Smart Wi-Fi Camera
Specification
- Chip V200
- Sensor 1 million pixels 1/4″ CMOS sensor
- Day/ night switch YES (IR-CUT)
- Shutter 1/25-1/10000
- White balance Automatic white balance
- Backlight compensation YES
- Digital noise reduction YES
- Motion detection YES
- Privacy masking YES
- mirror image YES OSD
- Scheduled restart YES
- Video Compressed H.264
- Resolution Main stream: 1280720 Sub stream: 7640360
- Video frame rate 25fps(50HZ) 25fps(60HZ)
- Video Set Brightness, saturation, Color, contrast, sharpness adjustment
- Connection WiFi 2.4G
- APP TUYA
- Working Temperature -20 C ~+70 C
- Power 0C5V
Get ready
- Make sure your mobile device is running iOS8 or higher, or Android 4. 1x or higher.
- NOTICE: Check if the network is 5 GHz. The camera only supports 2.4 GHz networks. If your router does not transmit a 2.4 GHz signal, ask your internet supplier for help to set up the router
- STEP 1. Enter your mobile phone number or email address.
- STEP 2. Enter the verification code and create a password.
Plugin
How do I reset my device?
- Press the “Reset” button for several seconds until the camera starts to beep.
- Optional: Insert a Micro SD card.
Add device
- Open the TuyaSmart app, click “+” at the top right corner of the “HOME” page, then select Smart Camera”.
- Make sure the indicator light on the device is flashing red quickly, then press “Next Step”.
- Enter your “Wi-Fi network and password”.
- Click “OK
- Read the instructions regarding how to Scan with the camera”. Click “Continue.
- Scan the QR code on your phone using the camera. When you hear a prompt tone, click “Heard the beep.
- When the indicator light on the device turns from a flashing red light to a steady green light, the network configuration is complete.
Frequently Asked Questions
Can I share with family and friends?
Yes, you can share your cameras with family and friends, who will have access to view the camera and control your devices. Press the Profile button and click on the Home Management button, and you will be able to give or revoke sharing permissions. To share, the other user should already have downloaded the app and registered a new account.
What is the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.
The device appears offline or unreachable.
Make sure your Wi-Fi router is online and in range. Make sure you have the latest app functionality by clicking Check for firmware update
Cannot connect to your Wi-Fi network.
Make sure you enter the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
How many cameras can I control?
The TuyaSmart app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit on how many devices can be connected to one router