VIVA UP0760 11 2 Inch Telescopic P Trap Installation Guide

VIVA UP0760 11 2 Inch Telescopic P Trap

Product Information

The Telescopic ‘P’ Trap is a plumbing component used to connect the waste pipe of a sink or basin to the main drainage system. It is designed to prevent foul odors and gases from escaping into the living space.

• Product Code: WTBT32T (for 32mm diameter waste pipes)
• Product Code: WTBT40T (for 40mm diameter waste pipes)
• Seal: 75mm

Swivel P Traps

Swivel P Traps offer flexibility by allowing you to adjust the outlet angle to better align with your plumbing setup. They feature an outlet nut, a soft rubber seal, and a swivel outlet for easy installation.

Other Traps

In addition to Swivel P Traps, we also offer Swivel S Traps and Bottle Traps.

• Swivel S Traps
  Swivel S Traps function similarly to Swivel P Traps but with a different shape. They are suitable for specific plumbing scenarios where a different trap configuration is required.

• Bottle Traps
  Bottle Traps are another type of trap commonly used in bathrooms. They have a distinctive bottle-like shape and are known for their compact design and efficient water seal.

• Join Pro+ Installers Club
  By joining the Pro+ Installers Club, you gain access to exclusive benefits and resources. Visit vivasanitary.co.uk/pro for more information.

Product Usage Instructions

WARNING: Improper installation and failure to follow the correct testing procedures may result in water leakage. Make sure to carefully read and understand these instructions before proceeding.

Telescopic ‘P’ Trap Installation

1. Identify the correct size of the ‘P’ Trap based on the diameter of your waste pipe. Choose between Product Code WTBT32T (for 32mm diameter waste pipes) or Product Code WTBT40T (for 40mm diameter waste pipes).
2. Ensure you have all the necessary tools and materials for installation.
3. Remove any existing trap or fittings from the waste pipe.
4. Insert the telescopic ‘P’ Trap onto the waste pipe, ensuring a secure fit.
5. Tighten the outlet nut to secure the trap in place.
6. Check for any leaks by running water through the sink or basin. If leaks are detected, double-check the tightness of the connections and re-tighten if necessary.

Swivel PTrap Usage

To adjust the outlet angle of the Swivel P Trap, follow these steps:

1. Loosen the outlet nut by turning it counterclockwise.
2. Rotate the swivel outlet to the desired angle.
3. Tighten the outlet nut by turning it clockwise to secure the trap in the adjusted position.

Swivel S Trap and Bottle Trap Usage

The usage of Swivel S Traps and Bottle Traps is similar to that of Swivel P Traps. Follow the same installation and adjustment steps as mentioned above.
For any further assistance or inquiries, please refer to the user manual or contact our customer support.

WARNING
We accept no liability for products fitted incorrectly, and where the correct testing procedures have not been used, resulting in the escape of water.

PRODUCT OVERVIEW

Swivel “P” Traps

• Product Code: WTP3276

• Description: 1¼” Swivel ‘P’ Trap

• Outlet: 32mm

• Seal: 75mm

• Product Code: WTP4076

• Description: 1½” Swivel ‘P’ Trap

• Outlet: 40mm

• Seal: 75mm

Swivel “S” Traps

• Product Code: WTS3276

• Description: 1¼” Swivel ‘S’ Trap

• Outlet: 32mm

• Seal: 75mm

• Product Code: WTS4076

• Description: 1½” Swivel ‘S’ Trap

• Outlet: 40mm

• Seal: 75mm

Bottle Traps

• Product Code: WTBT3238

• Description: 1¼” Bottle Trap

• Seal: 38mm

• Product Code: WTBT3276

• Description: 1¼” Bottle Trap

• Seal: 75mm

• Product Code: WTBT4038

• Description: 1½” Bottle Trap

• Seal: 38mm

• Product Code: WTBT4076

• Description: 1½” Bottle Trap

• Seal: 75mm

• Product Code: WTBT32T

• Description: 1¼” Telescopic Bottle Trap

• Seal: 75mm

• Product Code: WTBT40T

• Description: 1½” Telescopic Bottle Trap

• Seal: 75mm

Other Traps

• Product Code: WTRT40

• Description: 1½” Swivel Running Trap

• Seal: 75mm

• Product Code: WTB4019

• Description: 1½” x 19mm Seal Bath Trap

• Seal: 19mm

• Product Code: WTB4050

• Description: 1½” x 50mm Seal Bath Trap

• Seal: 50mm

• Product Code: WTST01

• Description: 1½” Sink Trap with Single 135° Nozzle

• Seal: 75mm

• Product Code: WTST02

• Description: 1½” Sink Trap with Twin 135° Nozzles

• Seal: 75mm

• Product Code: WTBNH01

• Description: 1½” Bowl & Half Kit

• Seal: 75mm

• Product Code: WTTP32

• Description: 1¼” Telescopic ‘P’ Trap

• Seal: 75mm

• Product Code: WTTP40

• Description: 1½” Telescopic ‘P’ Trap

• Seal: 75mm

• Product Code: WTKT32CE

• Description: 1¼” Straight Through Trap

• Seal: 75mm

• Product Code: WTSH40

• Description: 1½” Shower Trap (50mm Tray)

• Seal: 50mm

• Product Code: WTSH90

• Description: 1½” Shower Trap (90mm Tray)

• Seal: 50mm

• Product Code: WTWM01

• Description: 1½” Standpipe Trap

• Seal: 75mm

For more information please contact:

• VIVA Sanitary
• Units 1-2 Capitol Trading Park, Kirkby Bank Road
• Knowsley Industrial Estate, Liverpool, L33 7SY
• Tel: 0151 546 0531
• Fax: 0151 549 4187
• E-mail: sales@vivasanitary.co.uk

References

• Pro Club | Viva

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>