PIHOT P60 Max Smart 4K Drone Instruction Manual

PIHOT P60 Max Smart 4K Drone

Product Information

Specifications

• Model: &&):$51,1*
• Compatibility: Works with SD card of the &&)5XOHV2SHUDWLRQLVVXEMHFW
• Features: Supports two modes of operation with two different configurations
• Usage: Suitable for enhancing audio quality and may not affect video output

Product Usage Instructions

Installation

1. Insert the product into the designated slot on your device.
2. Ensure a secure connection is established between the product and your device.

Configuration

1. Select the desired mode of operation using the provided switch.
2. Adjust any settings on your device that may be required for optimal performance.

Operation

1. Power on your device and monitor the product’s indicator lights for proper functionality.
2. Test the audio output to ensure the product is functioning as expected.

FAQ

• Q: Can this product be used with all SD cards?
  A: This product is specifically designed to work with SD cards of the &&)5XOHV2SHUDWLRQLVVXEMHFW. Compatibility with other SD cards is not guaranteed.

• Q: What should I do if the product does not seem to be working?
  A: Check the connection between the product and your device. Ensure proper installation and configuration according to the user manual. If issues persist, contact customer support for further assistance.

Important Notices and Safety Guidelines
You are welcome to buy our products, in order to make it easier and more convenient for you to use this drone, please read this manual in detail.Do it later, and please keep this manual properly as an important statement for future adjustments and maintenance.

DISCLAIMER

• This product is not a toy, but a precision that integrates professional knowledge such as machinery, electronics, aerodynamics, and high-frequency emission.it needs to be assembled and debugged correctly to avoid accidents The product holder must use a safe way to operate Control; improper operation may cause serious personal injury or property damage.
• in case of improper use or operation, please contact your local dealer or our company’s personnel our company and seller are not responsible for any loss and damage caused by improper use or operation, as well as personal injury.
• Product contains small parts. Keep out of the reach of children to avoid eating or suffocation.

SAFETY PRECAUTIONS

UAV remote control model is the most dangerous product, be sure to flight away from the crowd. Improper assembly or damage to the body, pool electronic control and unfamiliar operations may cause unpredictable accidents such as damage to the drone or personal injury. Please pay attention to flight safety, and you must understand the responsibility for accidents caused by your own negligence.

• AWAY FROM OBSTRUCTIONS AND CROWD
  UAV remote control has flying speed and flight status uncertain, there is a potential danger. Stay away from crowds, High-rise buildings, power lines, etc. when flying, while avoiding flying in the wind and rain, lightning and other inclement weather. Debugging and installation of drones must strictly follow the operating instructions manipulate, keep a distance of 1-2 meters of the user or other person to avoid hitting the head, face and body of a person when flying or landing, causing injury.

• AWAY FROM MOISTURE ENVIRONMENT
  The internal of UAV is composed of many electronic components and precision mechanical parts, it is necessary to prevent moisture or water vapor into the UAV. In order to avoid mechanical, electronic component failure caused accidents. Please wipe the surface stains with a clean cloth during maintenance.

• AVOID MANIPULATION ALONE
  The experimental skills are learning some short-term difficulty. To try to operate the flight by yourself, you need experienced technical guidance.

• PROPER USING THIS PRODUCT
  Please use our original parts for modification or maintenance to ensure flight safety. Follow the instructions and use the product within the range permitted by function and not be used for illegal purposes other than the security decree.

• SAFE OPERATION

1. Please operate the remote control drone according to your own status and flying skills. Fatigue, poor spirits or improper operation will increase the probability of accident risk.
2. Do not use it close to the ear! Misuse may cause hearing damage.

• KEEP AWAY FROM HIGH-SPEED ROTATING PARTS
  When the drone’s rotor is rotating at high speed, please keep the pilot, surrounding people and objects away from the rotating parts to avoid danger and damage.

• KEEP AWAY FROM HEAT
  The remote control drone is composed of metal, fiber, plastic, electronic components and other materials. Therefore, it is necessary to keep away from heat sources, prevent the sun, and avoid deformation or even damage due to high temperature.

• ENVIRONMENTAL REQUIREMENTS
  Discarding this product at will may cause environmental impact, please recycle it property in accordance with local laws and regulations.

P60 FLIGHT TUTORIAL VIDEO

Notes for novices

• Please install the drone protective cover before flying.
• Before taking off, put the drone’s camera facing forward (it is easier to identify the direction).
• In order to avoid losing your drone, please control the flying distance of novices within 5 meters.
• Please fly in an open environment with no wind or breeze.
• Please thoroughly inspect the drone after crashing or violent impact.
• Store the drone and remote control in a cool and dry place, away from direct sunlight.
• Avoid direct contact with water or other liquids. If there is any contact, wipe it dry immediately with an absorbent cloth.

PROHIBIT DESCRIPTION
To ensure aviation radio (station) electromagnetic environmental requirements, It is prohibited to use all kinds of model remote controls and drones within 10 km on each side of the center line of the airport runway and 20 km on each end of the runway, as well as civil aviation routes and air routes. During the national authorities issued radio control commands in the region, it should be required to stop using the remote control model, drone.

AIRCRAFT PART NAME

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to orrect the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

CHARGE AIRCRAFT BATTERY
Remove the battery from the drone, connect the battery to the charging cable, and connect the charging cable to the USB charging port (fast charging is not allowed), and it can be charged. The LED indicator on the charging cable will turn red when charging and will go out when fully charged.

INSTALL THE BATTERY

PRECAUTIONS

• When charging the rechargeable battery, do not use it alone for children. It must be done under the supervision of an adult.Keep away from flammable materials when charging, and guardians should not leave the battery out of the monitoring range when charging.
• Please do not short-circuit or squeeze the battery to avoid explosion.
• The power terminal should not be taken out of the battery, and the terminal should not be short-circuited; do not short-circuit the battery, Decompose or throw into fire; do not put the battery in high temperature, heated places (such as fire or electric heating equipment Near).
• The model can only be used with the recommended charger. Regularly check the charging cable, plug shell and other components for damage, stop using them if they are found to be damaged, until the repair is intact.
• The charger is not a toy; the charger can only be used indoors.
• The battery after the flight needs to be charged and then stored. If not in use, It is recommended to charge the battery at least once every 3 months, so as not to over-discharge the battery and permanently damage the battery. BLADE

REPLACEMENT

1. The blades to be replaced must be replaced corresponding to the relative position on the arm. Fan blade A needs to be installed at position A, and fan blade B needs to be installed In position B, if the blade is replaced incorrectly, it will not be able to be controlled.
2. When flying, blade A rotates clockwise, and blade B rotates counterclockwise.

Obstacle avoidance (Available after purchasing modules)
During the flight of UAV, short press the obstacle avoidance switch on the remote control to turn on the obstacle avoidance function. After turning on, the UAV light flashes slowly. When the UAV encounters an obstacle in the flight direction, drone will automatically stop at a distance of about 1m from the obstacle and flash the light quickly. At the same time, the remote control will give a beep warning sound. At this time, the UAV cannot continue to fly in this direction. (Please use obstacle avoidance function with caution during strong winds) |

Connect the remote control

1. Put the battery into the aircraft battery slot in the correct direction, place the aircraft on the horizontal ground, press and hold the switch for about 3 seconds, and the aircraft light flashes, indicating that the startup is successful.
2. Turn on the remote control switch. After the remote control beeps, the light of the UAV changes from fast flashing to constant light. The connection is successful.

When the remote controller is connected to the aircraft, please ensure that no other remote controller and aircraft are powered on at the same time, otherwise the code will be crossed.

Gyro calibration
After the UAV is connected with the remote control, short press one key calibration button. The front and rear indicator lights of the UAV flash quickly, and the gyroscope is calibrated automatically. When the indicator light changes from flash to constant light, the calibration is completed.

During calibration, the aircraft must be placed on the horizontal ground, otherwise it will affect the flight stability,

BASIC FLIGHT CHECK BEFORE FLIGHT:

1. Whether the battery of the remote control and aircraft is fully charged.
2. Whether the propeller is installed correctly.
3. Whether the motor starts normally after the power is turned on and unlocked.

BASIC FLIGHT STEPS

1. Code pairing between the remote controller and the aircraft.
2. Open the software after connecting the drone wifi.
3. Perform gyroscope calibration.

Take-off method 1 (Recommended use) :
Short press the one-key takeoff button, the drone will automatically take off to about 1.5 meters.

Take-off method 2
Push the left stick of the remote control to 45° in the lower left corner, and at the same time push the right stick to 45° in the lower right corner to unlock the aircraft. After unlocking, move the left stick to Push up to take off. (As shown in Figure 1, Figure 2 below)

FLIGHT CONTROL METHOD

CAMERA ADJUSTMENT
Long press the camera up button on the remote control to adjust the drone lens upwards; Long press the camera down button on the remote control to adjust the drone lens downward.

360° ROLLOVER
The drone flies to a height of more than 3 meters, press the 360° flip button, push the right joystick in any direction, and the drone can complete Aerial stunt rolls.

SPEED ADJUSTMENT
The default of the drone is low speed. Press the speed adjustment button once to switch to medium speed (two beeps on the remote control), and then press the speed adjustment button again to switch to high speed (three beeps on the remote control), short press again to return to low speed (one beep on the remote control).

TROUBLESHOOTING

REMOTE CONTROL FUNCTION

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>