AJAX MOTCAMJ1 Motion Detector User Manual

: June 1, 2024
: ajax

Table of Contents

Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AJAX MOTCAMJ1 Motion Detector

AJAX MOTCAMJ1 Motion Detector Quick Start Guide

Before using the device, we strongly recommend reviewing the User Manual on the website.

Motion Cam Jeweller detects motion within a 39 ft range, snaps photos when triggered, and ignores pets.

Operating frequencies| 905-926.5 MHz FHSS (complies with part 15 of the FCC rules)
---|---
Power density RF| :s 0.60 mW/cm2
Radio signal range| up to 5.500 ft (in an open space)
Motion detector viewing angles (HN)| 88.5″ I 80°
Photo resolution| up to 640 x 480 px
Power supply| 2 batteries CR123A
Operation from battery| up to 4 years
Operating temperature range| from 14’Fto 104’F
Operating humidity| upto 75%
Dimensions| 5.3 X 2.8 X 2.4 •
Weight| 5.9 oz

MotionCam Jeweller is compatible only with hubs supporting visual alarm verification. Find this information on the hub’s packaging or Ajax official website.

Complete set: 1. MotionCam Jeweller; 2. SmartBracket mounting panel; 3. 2 batteries CR123A (pre-installed); 4. Installation kit; 5. Quick Start Guide.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20 cm the radiator and your body: Use only the supplied antenna.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device contains a licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device

To maintain compliance with ISED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.

Warranty: Warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, you should first contact the support service – in half of the cases, technical issues can be solved remotely.

The full text of the warranty is available on the website: www.ajax.systems/warranty.
User Agreement www.ajax.systems/end-user-agreement.
Technical support: support@ajax.systems

The manufacturing date is indicated on a sticker at the bottom of the box. The importer’s name, location, and contact details are indicated on the package