denver WCS-5023 Digital Wildlife Mini Camera Instruction Manual
- June 1, 2024
- Denver
Table of Contents
Denver WCS-5023 Digital Wildlife Mini Camera
Safety information
Please read the safety instructions carefully before using the product for the
first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Keep products out of the reach of children and pets to avoid chewing and swallowing.
- Never use old and new batteries or different types of batteries together in the main unit. Remove the batteries when you are not using the device for a longer period.
- Check the polarity (+/-) of the batteries when inserting them into the product. Wrong positioning can cause an explosion. Batteries are not included.
- Product operating and storage temperature is from -30 degrees Celsius to 70 degrees Celsius. Under and over this temperature might affect the function.
- Never open the product. Do not touch the inside electronics, or you may get an electric shock. Repairs or services should only be performed by qualified personnel.
- Do not be exposed to heat or direct sunlight!
- Do not use non-original accessories together with the product as this can make the product functionality abnormal.
Introduction
General description
This is a MINI trail camera. The camera features all-new innovative and ultra-
clear imaging technology, which encompasses smart night vision, blur
reduction, and noise reduction technology to deliver high-resolution image
quality. The camera is mini size which is easy to hide.
Key Features
- A. Programmable 2M/4MP/8MP/16MP/20MP/24MP/32MP/48MP/50MPinterpolated resolution
- B. Support interpolated full HD (4K/2.7K/1080P/720P) video recording;
- C. Take colour pictures in daylight and black-white pictures at night;
- D. 2 pcs high power invisible 940nm IR LEDs ;
- E. Available operation temperature: -30℃to 70℃;
- F. Build-In 2.0” LCD Screen to review photos and video in camera;
- G. Support standard 6V adapter and 4 AA batteries(Adapter and batteries not included)
- H. Extra-long range PIR;
- I. Adjustable PIR sensitivity;
Application
This camera can be used as an automatic surveillance device for guarding and
recording unexpected intrusions to homes, shops, schools, depots, offices,
taxis,
work sites, etc. It can also be used as a trail camera for hunting or
monitoring animals by recording the traces of wild animals. It can be left
alone for weeks and months, and it will save event records automatically in
digital format.
Cautions
- The working voltage of the camera is 6V. The camera can be supported by a power adapter or 4 AA batteries (Adapter and batteries not included).
- Please install batteries according to the shown polarity.
- Please insert the Micro SD card before powering on the camera. The camera has no internal memory for saving images or videos. The camera will not work if there is no SD card. (Micro SD card not included)
- Please do not insert or take out the SD card when the power switch is in position.
- Make sure to format the Micro SD card into FAT 32 using a PC before use. Many other Micro SD cards formatted by other cameras have poor compatibility with different brands of cameras.
- So it is best to format the SD card with a computer. In the SETUP mode, the camera will shut down automatically after 3 minutes without any operation.
- Please turn on the power again if you want to continue to work with the control.
Camera Overview and Details
Camera Overview
Take a few moments to familiarize yourself with the camera controls and
display. It is helpful to bookmark this section and refer to it when reading
through the rest of the manual.
Mode Switch Introduction
Setup Mode: Slide the Mode Switch to “SET UP”, then the Camera will enter
Setup mode. In this mode, you can program the camera or playback the photos or
video clips.
Hunting Mode: Slide the Mode Switch to “ON”, then the Camera will enter
hunting mode. In this mode, when an animal or human intrudes into the
monitoring region, the camera will take pictures or videos automatically
according to the previously programmed settings.
After switching to the “ON” position, the screen will show Mode: Motion Detection, Press OK to continue then: PIRpreparing time count down. So you can put the camera in the correct position during this period. (The screen is OFF for power saving at ON) OFF Mode: Slide the Mode Switch to “OFF”, then the camera will power off. Camera General OperationsThis chapter explains the general operations for camera settings.
Power Supply
- Use 4 AA batteries. High-density and high-performance alkaline or lithium batteries are recommended (Batteries not included).
- Also, a 6V external power supply and solar panels are supported. The battery can be just a backup for emergency use (5V support). (Adapter not included)
Insert SD card
Insert a micro SD card. (SD card not included)
Preview Information Display
- Slide the Mode Switch to “SETUP”, then the Camera will enter Set up mode.
- When the camera enters “SETUP” mode the current settings will be displayed onscreen.
Settings Menu
- Press “MENU” on the keyboard to enter the menu settings. The settings menu will be shown on the LCD.
- Use the “▲” or “▼” key to select the menu item, use “OK” to enter the sub-menu select the different options, and Press “OK” to save the settings.
Setting Items
Please notice – All products are subject to change without any notice. We take
reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment contains materials, components and
substances that can be hazardous to your health and the environment if the
waste material (discarded electric and electronic equipment) is not handled
correctly.
Electric and electronic equipment is marked with the crossed-out trash can
symbol, seen above. This symbol signifies that electric and electronic
equipment should not be disposed of with other household waste, but should be
disposed of separately. All cities have established collection points, where
electric and electronic equipment can either be submitted free of charge at
recycling stations and other collection sites or be collected from households.
Additional information is available at the technical department of your city.
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
Contact
Nordics
Headquarter
Denver A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00
(Push “1” for support)
E-Mail
For technical questions, please write to:
support.hq@denver.eu
For all other questions please write to:
contact.hq@denver.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>