Sea-Dog 103590QG Performance Paddle Clip Sae Power Socket Instructions
- June 1, 2024
- SEA-DOG
Table of Contents
Quality Marine Gear
SAE POWER SOCKET
– FRONT MOUNT
Injection Molded PVC
Bulk| Display| A| B| C| D| Volts| Max
Amps| Wire Gauge| Wt.(lb.)| Std. Pack
---|---|---|---|---|---|---|---|---|---|---
n/a| 426950-1| 5”| 1-1/4”| 1”| 3/4”| 12-24| 20A @ 12V| 14 AWM| .12| 10 ea
SAE type Polarized Electrical Connector is a two-prong power socket connector
set. Great for solar panel connections and maintaining battery charge.
14-gauge duplex wire. Drill 3/4” hole and install with two #10 RH screws (not
included). Maximum:
20A @ 12VDC.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
BACK NUT MOUNT
Injection Molded PVC
Bulk| Display| A| B| C| D| Volts| Max
Amps| Wire Gauge| Wt.(lb.)| Std. Pack
---|---|---|---|---|---|---|---|---|---|---
n/a| 426955-1| 5”| 1-13/16”| 1”| 7/8”| 12-24| 20A @ 12V| 14 AWM| .13| 10 ea
SAE type Polarized Electrical Connector is a two-prong power socket connector
set. Great for Solar panel connections and maintaining battery charge.
14-gauge duplex wire. Installation is as easy as drilling a 7/8” hole,
inserting the socket body, tightening the locking nut and connecting the
wires. Maximum: 20A @ 12VDC.
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
PERFORMANCE PADDLE CLIP KIT
Injection Molded Nylon/Stainless Steel
Bulk| Display| A| B| Fastener| Wt.(lb.)| Std.
Pack
---|---|---|---|---|---|---
n/a| 491361-9| 1-1/8”| 4”| 1/4” PH| .18| 10 kits
This one-piece Performance Paddle Clip allows for simple, one-handed storage
of your paddle. Features an anti-snag ramp to prevent line from getting stuck
under the clip when not in use, and leash attachment points for securing a
paddle leash. Kit includes: Paddle clip (1), 10-32 X 1” PH machine screws (2),
10-32 Nyloc nuts (2), #10 flat washers (2), and #10 well nuts (2).
Proudly constructed in the USA of UV resistant injection molded nylon with
stainless steel hardware.
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
DRAIN PLUG KIT
Injection Molded Nylon
Bulk| Display| A| B| Fasteners Included| Wt.(lb.)|
Std. Pack
---|---|---|---|---|---|---
n/a| 520010-9| 1”| 1-1/2”| Yes| .08| 10 kits
This Drain Plug was designed with a molded-in recess in the base to trap
sealant to provide a watertight seal. For transom installations, baitwells,
ice chests, tanks, etc. Kit includes: Drain plug and base (1), foam gasket
(1), 10-32 X 1” OH machine screws (2), 10-32 Nyloc nuts (2), #10 flat washers
(2), and #10 well nuts (2). Proudly constructed in the USA of UV resistant
injection molded nylon with stainless steel hardware.
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
PADDLE & POLE KEEPER KIT
Injection Molded Nylon/Polypropylene
Bulk| Display| Description| Fasteners Included|
Wt.(lb.)| Std. Pack
---|---|---|---|---|---
n/a| 671400-9| Paddle & Pole Keeper Kit| Yes| .34| 5 kits
This Paddle & Pole Keeper Kit lets you easily store your pole or paddle and
frees up your hands for other activities! Kit includes: 18” of 1/4” bungee
(2), bungee terminal ends w/ sleeve (4), lashing hooks w/ one hole (2), 10-32
X 3/4” PH machine screws (6), 10-32 Nyloc nuts (6), #10 flat washers (6),
trifold pop rivets (6), and easy installation instructions. Proudly
constructed in the USA of injection molded nylon and polypropylene with
stainless steel hardware.
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>