SEA DOG 103641QG Front Mount Power Socket Owner’s Manual
- June 1, 2024
- SEA-DOG
Table of Contents
SEA DOG 103641QG Front Mount Power Socket
Specifications
| Product | Material | Mount Type | Wire Gauge | Max Amps | Weight (lb.) | Std. Pack |
|---|---|---|---|---|---|---|
| SAE POWER SOCKET – FRONT MOUNT | Injection Molded PVC | Front Mount | 14 AWM | 20A | ||
| @ 12V | 0.12 | 10 ea | ||||
| SAE POWER SOCKET – BACK NUT MOUNT | Injection Molded PVC | Back Nut Mount | 14 | |||
| AWM | 20A @ 12V | 0.13 | 10 ea | |||
| PERFORMANCE PADDLE CLIP KIT | Injection Molded Nylon/Stainless Steel | N/A | N/A | |||
| N/A | 0.18 | 10 kits | ||||
| DRAIN PLUG KIT | Injection Molded Nylon | N/A | N/A | N/A | 0.08 | 10 kits |
| PADDLE & POLE KEEPER KIT | Injection Molded Nylon/Polypropylene | N/A | N/A | N/A | ||
| 0.34 | 5 kits |
Product Usage Instructions
SAE POWER SOCKET – FRONT MOUNT:
The SAE Power Socket Front Mount is designed for easy installation in various
applications. Follow these steps:
- Drill a 3/4″ hole for the socket.
- Insert the socket into the hole.
- Secure it in place with two #10 RH screws (not included).
- Connect the wires using the provided 14-gauge duplex wire.
SAE-type Polarized Electrical Connector is a two-prong power socket connector
set. Great for solar panel connections and maintaining battery charge.
14-gauge duplex wire. Drill 3/4” hole and install with two #10 RH screws (not
included).
Maximum: 20A @ 12VDC.
SAE POWER SOCKET – BACK NUT MOUNT:
The SAE Power Socket Back Nut Mount offers a simple mounting solution. Here’s
how to install it:
- Drill a 7/8″ hole for the socket.
- Insert the socket body into the hole.
- Tighten the locking nut to secure the socket.
- Connect the wires using the provided 14-gauge duplex wire.
SAE-type Polarized Electrical Connector is a two-prong power socket connector
set. Great for Solar panel connections and maintaining battery charge.
14-gauge duplex wire. Installation is as easy as drilling a 7/8” hole,
inserting the socket body, tightening the locking nut and connecting the
wires.
Maximum : 20A @ 12VDC.
PERFORMANCE PADDLE CLIP KIT:
The Performance Paddle Clip Kit provides an easy way to store your paddle.
Follow these steps for installation:
- Attach the paddle clip using the included fasteners.
- Utilize the anti-snag ramp to prevent line entanglement.
- Secure a paddle leash to the leash attachment points if desired.
This one-piece Performance Paddle Clip allows for simple, one-handed storage of your paddle. Features an anti-snag ramp to prevent line from getting stuck under the clip when not in use, and leash attachment points for securing a paddle leash.
Kit includes:
- Paddle clip (1),
- 10-32 X 1” PH machine screws (2),
- 10-32 Nyloc nuts (2),
-
10 flat washers (2),
- and #10 well nuts (2).
Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware.
DRAIN PLUG KIT:
The Drain Plug Kit is ideal for watertight sealing in various applications.
Here’s how to install it:
- Place the drain plug and base in position.
- Use the foam gasket to ensure a tight seal.
- Screw in the provided machine screws and nuts securely.
This Drain Plug was designed with a moulded-in recess in the base to trap sealant to provide a watertight seal. For transom installations, baitwells, ice chests, tanks, etc.
Kit includes
- Drain plug and base (1),
- foam gasket (1),
- 10-32 X 1” OH machine screws (2),
- 10-32 Nyloc nuts (2),
-
10 flat washers (2),
- and #10 well nuts (2).
Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware.
PADDLE & POLE KEEPER KIT:
The Paddle & Pole Keeper Kit allows convenient storage of your paddle or pole.
Follow these steps for setup:
- Attach the bungee terminal ends and lashing hooks as per instructions.
- Securely fasten the components using the provided hardware.
- Refer to the installation guide for detailed steps on setting up the kit.
This Paddle & Pole Keeper Kit lets you easily store your pole or paddle and frees up your hands for other activities!
Kit includes
- 18” of 1/4” bungee (2),
- bungee terminal ends w/ sleeve (4),
- lashing hooks w/ one hole (2),
- 10-32 X 3/4” PH machine screws (6),
- 10-32 Nyloc nuts (6), #10 flat washers (6),
- trifold pop rivets (6), and easy installation instructions.
Proudly constructed in the USA of injection moulded nylon and polypropylene with stainless steel hardware.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
FAQ
Q: How do I maintain the SAE Power Socket connectors?
A: To maintain the SAE Power Socket connectors, periodically check for any
signs of corrosion or damage. Clean them with a mild solvent if needed and
ensure a secure connection for optimal performance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>