SEA-DOG 401840-3 Led Square Mirror Light User Guide
- June 10, 2024
- SEA-DOG
Table of Contents
SEA-DOG 401840-3 Led Square Mirror Light
Product Information
LED Square Mirror Light
The LED Square Mirror Light is a modern lighting fixture with a built-in touch on/dim/off switch. It comes with four #6 FH fasteners and fastener covers for easy installation. The light has three color options (blue, white, and off) and a dimming feature that remembers the last brightness setting.
Product Assembly Instructions
- Connect the positive and negative power wires and test the light to ensure it is working properly. Then, thread the power wires through the hole.
- Using the light as a template, mark the mounting holes and drill a 1/16 inch hole for each fastener. Use the four #6 FH fasteners (included) to affix the light to the surface.
- Insert the fastener covers until they firmly click into place.
product How To Use
To turn on the light, touch the center button. Each touch will switch between blue, white, and off. Continue to touch the button to activate the dimmer feature. When turning on and off, the light will remember the last brightness setting you selected.
Assembly Instructions
- Connect the positive and negative power wires and test the light to make sure everything is working. Then thread the power wires through the hole.
- Using the light as a template, mark the mounting holes and drill a 1/16″ hole for each of the fastener. Using the four #6 FH fasteners (included), affix light to surface.
- Insert fastener covers until they firmly click into place.
How To Use
Touch the center button to switch between blue, white, and off. Continue to
touch button to activate dimmer.
When turning on and off, the light will remember the last brightness setting
you selected.