Lenovo TB372FC Tab P12 with Matte Display User Guide

Lenovo TB372FC Tab P12 with Matte Display

Lenovo Tab P12 with Matte Display

Specifications

• Model: TB372FC
• Display: Matte Display
• Wireless Frequency Bands:
  • WLAN 2400 – 2483.5 MHz
  • WLAN 5150 – 5250 MHz
  • WLAN 5250 – 5350 MHz
  • WLAN 5470 – 5725 MHz
  • WLAN 5725 – 5850 MHz
  • Bluetooth 2400 – 2483.5 MHz
• Maximum Power: Varies based on frequency band
• SAR (Specific Absorption Rate) Information:
  • Body-worn: 1.46 W/kg
  • Limb: 1.46 W/kg

Product Usage Instructions

Get Started
Before using the Lenovo Tab P12, it is recommended to read the user manual thoroughly.

• Read this guide carefully before using your device.
• All pictures and illustrations in this guide are for your reference only. The actual product may vary.

Overview
The Lenovo Tab P12 features a matte display for reduced glare and improved viewing experience.

1. Speakers 2 Card tray
2. Power button/Fingerprint sensor
3. Volume buttons
4. Microphones
5. Front camera
6. USB-C connector
7. Rear camera
8. Flash
9. Smart connector

Installation of Cards

1. Turn off the device before inserting or removing a card.
2. For microSD card installation, locate the card tray
3. and carefully insert the microSD card into the designated slot.

Buttons and Connectors

• Speakers (1): For audio output.
• Volume buttons (4): Adjust the device’s volume levels.
• USB-C connector (7): For charging and data transfer.
• Smart connector (10): Connect accessories for enhanced functionality.
• Power button/Fingerprint sensor (3): Power on/off the device and use fingerprint authentication.
• Microphones (5): Capture audio input.
• Rear camera (8 ): Capture photos and videos from the back of the device.
• Front camera (6): Take selfies and engage in video calls.
• Flash (9): Provides additional lighting for photos in low-light conditions.

Help and More
For additional information and to download the complete User Guide, visit https://support.lenovo.com.

European Union (EU) / United Kingdom (UK) compliance statement

• Lenovo (Singapore) Pte. Ltd declares that the radio equipment type: TB372FC is in compliance with EU Radio Equipment Directive 2014/53/EU.
• Lenovo (Slovakia) Ltd declares that the radio equipment type : TB372FC is in compliance with UK Radio Equipment Regulation SI 2017 No. 1206.

The full text of the system declarations of conformity are available at:

https://www.lenovo.com/us/en/compliance/eu-doc for EU and
https://www.lenovo.com/us/en/compliance/uk-doc for UK.

This radio equipment operates with the following frequency bands and maximum radio-frequency power:

Restrictions of use:
Usage of this device is limited to indoors in the band 5250 to 5350 MHz .

Specific Absorption Rate information
THE DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES. The device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and included a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.

The highest SAR values under the ICNIRP guidelines for your device model are listed below:

The above information is for EU countries and UK. Please refer to the actual product for supported frequency bands in other countries.

During use, the actual SAR values for your device are usually well below the values stated. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of the device is automatically decreased when full power is not needed for the data connection. The lower the power output of the device, the lower its SAR value. If you are interested in further reducing your RF exposure, you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.

Frequently Asked Questions

Q: Can I use the Lenovo Tab P12 outdoors?
A: While the device can be used indoors in specific frequency bands, it is not recommended for outdoor use beyond those limits.

Q: How do I perform a factory reset on the Lenovo Tab P12?
A: To perform a factory reset, go to Settings > System > Reset options > Erase all data (factory reset). Note that this action will erase all data on the device, so make sure to back up important information before proceeding.

Printed in China

References

• Lenovo Support | Drivers, Troubleshooting, Warranty, Repair | Lenovo Support US
• Lenovo Support | Drivers, Troubleshooting, Warranty, Repair | Lenovo Support US
• Lenovo EU Declaration of Conformity Compliance Information | Lenovo US
• Regulatory Compliance | UK Declaration of Conformity | Lenovo US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>