AVT DMX512 USB Converter Instruction Manual
- June 9, 2024
- AVT
Table of Contents
AVT DMX512 USB Converter
Instruction
The device is dedicated to all laptop owners dealing with lighting controllers. The DMX system allows up to 512 devices controlled via a three- wire bus. The converter is a small transition module between a computer equipped with a USB port and the lighting installation. Full galvanic separation eliminates the problems of interference on the DMX line, which could have caused unstable operation of the converter. The device is particularly useful for all DMX standard lighting operators.
Properties
- support up to 512 devices
- transmission range up to 1200 m
- connection of devices – 3 pin XLR socket
- cooperation with USB1.1 and 2.0 (emulated COM port)
- cooperation with numerous free programs
- power supply directly from the USB port
- USB cable included in the set
Installation
Installation of the device in the system is automatic. Drivers can also be
downloaded from
https://www.ftdichip.com/
The virtual COM port driver is required. After installing the drivers, an
additional virtual COM port will appear in the system.
This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment.
AVT SPV reserves the right to make changes without prior notice. Installation and connection of the device not in accordance with the instructions, arbitrary change of components and any structural modifications may cause damage to the device and expose persons using it to harm. In this case, the manufacturer and its authorized representatives shall not be liable for any damage caused directly or indirectly by the use or malfunction of the product.