Haoyuguang X15 TWS Wireless Headset Instruction Manual

: June 1, 2024
: Haoyuguang

Table of Contents

Product diagram
F&Q
Read User Manual Online (PDF format)
Download This Manual (PDF format)

X15 TWS Wireless Headset
Instruction Manual

Product parameters are laboratory test data, the specific data is subject to the use of data

Product diagram

Headset Configuration
Product model: X15 Version: 5.3
Running time: about 4 hours Call time: approximately 4 hours
Operation mode: touch operation Charging time: about 1.5 hours
Effective distance: 210m — Horn: 613mm
Packing list

charging box *1
Left and right carphones *1
Product Manual #1
Charging cable *1

Charging bin configuration parameters
Shell material: ABS
charging ask: about one hour
The input voltage: 5 v / 200 mah
Wearing a way
Open the cover of the charging bin, take out the earphone of the right ear, gently put the speaker end of the earphone into the ear canal of the right ear, and then gently sway the earphone not to shake.
Mode of operation

The boot
(1) Open the cover of the charging case, the earphone will start up automatically, and the earphone blue light will flash red
(2) When the headset is off, touch the touch pad of the headset for 3 seconds to start the headset
To turn it off
1. Put the earphone back into the charging binand close the cover. The earphone will be turned off and charged
2. When the headset is on, touch the touch pad of the headset for 5 seconds to turn it off

Pairs of ears connected

Open the cover of the charging bin, take out the earphones and start up automatically. The red and blue lights flash, and enter the state of automatic team formation.
Open the device Wireless list and search for “X15”
Click ”X15”to connect. If the connection fails,put the earphone back into the charging bin and cover it, and then repeat the above steps.
When both ears leave the normal connection distancewith the device at the same time, the headset will enter the wireless headset connection state. If the connection is not successful within 5 minutes, the headset will automatically shut down.
After the headset is turned on and before the mobile phone is connected, three clicks on either side of both ears will automatically switch between
Chinese and English languages(After the headset is turned on and before the mobile phone is connected, three clicks on either side of both ears will automatically switch between Chinese and English languages)

After the device is connected for the first time, the headset will automatically connect to the last pair device when it is restarted next time
Binaural touch operation Charging: headsets in the charging box automaticallyA red light after charging indicator red, full of the flameCharging box of low electricity: digital] tube single digits flashingCharging box: digital tube single digits flashing, full of 100 to stop

F&Q

1. Q: How come only one earphone has sound?

A: Put the two cardphones back into the charging bin at the same time, close the cover to charge, and then take them out to see whether the dual-ear mode is restored. If the fault is not rectified, restore the fault to factory Settings

2. Q: The phone can’t connect to the headset?

A: Delete the paired X15 on the mobile phone, and then make the paired connect icon.

3. Q: How can I listen to music/talk without sound?

A: Android phones have a setting icon on the right side of the phone connection record. Click enter to select two audio Deselect and then re- select. Enter audio Call mode in Setting General Accessibility, and select Automatic, if it is automatic, then other options, and then change to automatic, if not restored, Delete the pairing record retry attempt.

4. Q: Why is there a stutter/stutter?

A: If you use headphones, there are a lot of Wi-Fi devices, 4G signals, high power appliances and so on Interference, stuttering and discontinuous conditions may occur, and the connection can be restored by changing the environment or re-pairing.

Matters needing attention

Please use a charger with safety certification from a formal source for charging
Adjust the volume ot headphones to avoid damage to hearing
the correct use of the product to avoid falling from high or heavy extrusion
Children should be accompanied by adults to avoid accidental ingestion
Stay away from extreme environments such as high temperature or humidity
Do not disassemble the product

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.