Haoyuguang 5050 LED Bluetooth Light App User Manual
- June 17, 2024
- Haoyuguang
Table of Contents
User Manual
5050 LED Bluetooth Light App
hyglight LED is a mobile APP Control System developed with a Bluetooth Controller. Its remarkable characteristic is the operation is simple, the function diversification, can satisfy the majority user to the light demand. Let the user on the mobile phone can experience the fun that the light brings.
Open the mobile phone and scan the code to download the app
http://ota.bojialighting.com/hygl
After downloading and installing, open the APP nd go to the operating
interface
When the er first us the AP,ft Click on the Blue-tooth Connection, open the
Bluetooth Menu g0to the Blue’tooth packet interface, and select the device
that ca be opened with one click coectio
Then, you can start from the main inter face.
Main page 4 solor whee! take color, adjust the brightness of the upper right
corner gear key point to open the setting page the home page can choose
classic colors and custom common colors, middle light bulb icon switch light,
upper right corner can choose import picture take color.
Points For Attention
- Ifyou have been unable to search for a bluetooth controtie: device or connect to a bluetooth light device for a long time, make sure the bluetoothon your phone Is turned on and click the APPrefresh button to reconnect;
- tf you have been unable to connect to the device for a long time or other exception occurs, close the application, then restart and try connecting again:
- Don’ t place the bluetooth controller device in a closed mecal body. The metal will block the bivetooth signal, resulting in unsuccessful connection:
- Don’ t placebluetooth controller equipment in a wet or watery place;
- In 5-24¥ DC, 50-60Hz power supply use, please confirm the parameters of the lamp strip fatching use, to svoid buming out the lamp strip and controller,
- The bluetooth controller device is not a toy and can not be touched by children;
- Don’ t place bluetooth controller equipment on a hot surface;
- For safety reasons, according to the warranty, please do notopen any sealed device, if there is a need for professional help to rernove the assembly, to avoid damage to the device;
- Please cut off the power before replacing the bluetooth controler, to avoid the impact of the use of the instant.
The main page selects the music interface, plays the music light to beat along with the music rhythm.
click on the top right file icon can be imported mobile music
When select the rhythm, enter the rhythm mode, the light can be collected with the audio signal changes
When selecting mode options, enter system mode selection, built-in dozens of dynamic mode for users to choose.
When selecting the lock, enter timing mode, the user can set the switch light.
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are de signed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequen cy energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However. there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is en couraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’S RF Exposure guidelines, this equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna nr transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>