MAYFAIR 089360 Mbm Lucent Flush Mount Instruction Manual

MAYFAIR 089360 Mbm Lucent Flush Mount

Product Information

The MBM Lucent Flush Mount is a high-quality luminaire that requires assembly and installation before use. It is compatible with GX53 lamps of 128mm diameter or smaller. The luminaire has a real brass finish with an alabaster shade and comes with a loop terminal for live supply. It has a maximum rated voltage of 220-240V~ 50Hz and a lamp holder for installing a lamp with a wattage rating within the specified range.

Installation Instructions

1. Remove all packaging material from the product and ensure all accessories are accounted for.
2. Detach the lamp body (C) from the shade assembly (J) by loosening the nut (I).
3. Attach the housing(B) onto the lamp body (C) and use it as a template to mark the screw positions on the ceiling.
4. Install the lamp body (C) onto the ceiling using appropriately sized mounting screws (E) and anchors (A).
5. Remove the cover (F) from the terminal block (D) and connect the mains supply wire to the terminal block (D). A loop terminal is provided on the terminal block.
6. Install a compatible lamp into the lamp holder (H – not included).
7. Install the shade assembly(J) back onto the lamp body (C) and secure it by tightening the nut (I).
8. Switch on the luminaire to test all lighting functions and enjoy your new luminaire.

Safety Tips

• All wiring connection and disconnection must be performed by a licensed electrician.
• Ensure that the screws and anchors used for installation are suitable for the mounting surface and surrounding environment.
• Do not exceed the maximum wattage rating of the lamp holder.
• Ensure that all wires are secure and no bare wires are exposed.

Specifications

MBM LUCENT FLUSH MOUNT
SKU# 089360
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Mayfair product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.

Installation Requirements

• This luminaire must be assembled and installed by a licensed electrician.

• All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
  E.g. AS/NZS 3000 Electrical Installations.

• This luminaire is a Class I product and must be earthed during wiring and installation.

• Do not exceed the maximum wattage rating.
  NOTE : Compatible with GX53 lamps of 128mm diameter or smaller.
  Lucci SKU# 121363 or 121364 GX53 lamps are recommended.

• Select a suitable location for installation:

  • This luminaire is suitable for indoor use only.
  • The mounting point must support 2 times the weight of the luminaire.
  • Ensure the luminaire is not installed in direct line of an air vent/system.
  • If installing a luminaire in an area prone to moisture, ensure that the area is well ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.

• Take care not to pull any electrical wires during unpacking as this may damage the connection.

• Lay out all the components on a smooth surface and make sure no components are missing before assembling.
  If parts are missing, return the complete product to the place of purchase for inspection or replacement.

• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

• Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.

Installation Directions

1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.

2. Remove the lamp body (C) from the shade assembly (J) by loosening the nut (I).

3. Attached the housing(B) onto the lamp body (C), Use the lamp body (C) as a template to mark the screw positions on the ceiling.

4. Install the lamp body (C) onto the ceiling by using appropriately sized mounting screws (E) and anchors (A).
   Ensure the screws (E) and anchors (A) used are suitable for the mounting surface and the surrounding environment.

5. Remove the cover (F) from the terminal block (D) by loosening the nut (G).
   NOTE: Keep the cover (F) and nut (G) in a safe place, they are required for re-installation later.

6. Connect the mains supply wire to the terminal block (D). A loop terminal is provided on the terminal block. Please see the LOOP TERMINAL section for assistance with the wiring connection and wiring diagram.
   NOTE:

   • Must Install the cover (F) back onto the terminal block (D) and secure using the nut (G).
   • If you are using the LOOP TERMINAL, please ensure the loop terminal is covered.
   • Ensure the wires are secure, and no bare wires are exposed.

7. Install a lamp (H – not included) into the lamp holder. Do not exceed the maximum wattage rating.
   NOTE: Compatible with GX53 lamps of 128mm or smaller.
   Lucci SKU# 121363 or 121364 GX53 lamps are recommended.

8. Install the shade assembly(J) back onto the lamp body (C) and secure by tightening the nut (I), Secure the shade assembly (J) on the lamp body(C) by turning the shade assembly (J) clockwise.

9. After the installation, switch on the luminaire to test all the lighting functions and enjoy your new luminaire.

Loop Terminal

The loop terminal is provided as a second live supply terminal. It is useful when a switch is included into the wiring as shown in the diagram below.

WARNING: ALL WIRING CONNECTION & DISCONNECTION MUST BE PERFORMED BY A LICENSED ELECTRICIAN

NOTE:

• Must Install the cover (F) back onto the terminal block (E) and secure using the nut (G).
• Ensure the loop terminal is covered.
• Ensure the wires are secure, and no bare wires are exposed.

Safety Tips

• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
• To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the luminaire in water or other liquids.
• Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.

Product Specifications

NOTE: Compatible with GX53 lamps of 128mm diameter or smaller.
Lucci SKU# 121363 or 121364 GX53 lamps are recommended

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>