ZAZU Sleeptrainer With Nightlight And Sound Machine User Manual

June 9, 2024
ZAZU

ZAZU Sleeptrainer With Nightlight And Sound Machine User Manual

ZAZU Sleeptrainer With Nightlight And Sound Machine

How does Brody works

FIG 1 How does Brody works

“Research shows that red light does not interfere with the production of the sleeping hormone melatonine and is therefore a suitable colour for a nightlight.”

The basics

FIG 2 The basics

Change the settings

FIG 3 Change the settings

FIG 4 Change the settings

FIG 5 Change the settings

First time use

FIG 6 Change the settings

Nightlight and sound machine

Brody can light up his belly and play music for 10 minutes.

  • Press the belly for 3 seconds. The light will blink when the timer is activated.
  • The last chosen setting for light and sound will be played.
  • Press again 3 seconds to switch the 10 minute timer OFF.

CHANGE THE SETTINGS

FIG 7 CHANGE THE SETTINGS

Note The selected brightness will also affect the brightness of the orange and green light in the morning. Except when ‘no light’ is chosen, then orange and green will be medium brightness.

CRY SENSOR
Brody can turn the light/sound back on for 10 minutes when your little one is crying. The cry sensor will stay active for 12 hours, from the moment you switch on the nightlight.

FIG 8 CRY SENSOR

Sleeptraining

Brody can change the colour of his belly from red, to orange, to green to indicate when it is OK to get up.

FIG 9 Sleeptraining

Note No need to set a bedtime. Two hours after OK to get up the light will automatically switches from green back to red.

WARNING! SAFETY GUIDELINES

  • Important! keep for future reference.

  • This ZAZU product is fully compliant with the EU, CA, AU, NZ,
    USA and CN legislation.

  • Please keep the packaging away from small children.

  • Never allow your child to play with the batteries.

  • This product works with 3x AA 1.5 V batteries (not included).

  • Only use the specified batteries.

  • Batteries should be placed in the correct polarity.

  • Do not short-circuit the power terminal.

  • When not in use please switch the product OFF completely.

  • Remove empty batteries from the product.

  • Batteries should only be placed by adults.

  • Do not mix old and new batteries.

  •  Do not mix alkaline, standard (carbon-Zn), or rechargeable Ni MH) batteries.

  • Only use alkaline batteries, no zinc carbon.

  • Non-rechargeable batteries cannot be charged.

  • Do not place too close to baby. Instead fixate the plush to the cot with the velcro strap.

  • The plush can be washed by hand and air dried, but remove the module beforehand.

  • This light does not get warm.

  • This product is intended for indoor use and is not water resistant. Please keep dry.

  • For cleaning do not immerse in water, but wipe with a damp cloth.

  • Do not try to disassemble the product if it stops working.
    Please contact customer service.

  • The EC Declaration of Conformity can be requested from the below address: [email protected]

Manufactured and distributed by ZAZU
PO Box 299 | 3740 AG Baarn
The Netherlands | [email protected]

ZAZU Limited | Unit 10, English business P
English Close, Hove, East Sussex
BN3 7ET, Great Britain

FIG 10 fEATURE

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ZAZU User Manuals

Related Manuals