SCARLETT SC-EK27G98 ELectric Kettle Instruction Manual
- June 4, 2024
- SCARLETT
Table of Contents
SC-EK27G98 ELectric Kettle
Instruction Manual
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
- Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.
- Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the main parameters.
- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
- Always unplug the appliance from the power supply when not in use.
- For home use only. Do not use it for industrial purposes.
- Keep the base unit away from water and protect it from splashes.
- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.
- Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary. Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
- To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
- Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.
- Do not leave the appliance unattended when in use.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
- Never take the kettle from its base while in operation. Switch the appliance off first.
- Electric kettle with button in turn-on position is forbidden to put on the base.
- ATTENTION: Do not open the lid while water is boiling.
- Close the lid properly before switching it on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.
- The kettle is for heating water only, not for any other purposes and liquids.
- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on
- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
- Production date mentioned on the unit and/or on the packing materials and documentation.
BEFORE USING IT FOR THE FIRST TIME
- The kettle is suitable for boiling water.
- To remove the foreign smell from the new unit before the first use boils the water with added juice of 1-3 lemons or a pack of citric acid.
- Leave the fluid in the unit for 12 hours, then boil again.
- Pour the solution out and rinse the kettle inside carefully avoiding falling water on the electric contacts. Repeat the procedure if necessary.
INSTRUCTION FOR USE FILLING
- Removes the kettle from the base unit.
- You can fill the kettle with water via the spout or neck with opened lid.
- Do not fill the kettle with less than 0.5 l of water (less than the “MIN” mark) to prevent it from operating dry and more than 1.7 l (up to the “MAX” mark) to avoid overfilling and water spilling out during the boiling.
SWITCHING ON
- After filling with water, place the kettle on the base unit.
- Connect the plug to the power supply and push the On/Off switch. The appliance will turn on and the indicator will light.
SWITCHING OFF
- When water begins to boil, the kettle will switch off automatically and the indicator light will go off.
- NOTE: This appliance has a safety system, which automatically switches the heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case, let the appliance cool down for 10 minutes before filling it with water again.
SWITCHING ON AGAIN
If the kettle has been switched off automatically, it can be switched on again
after cooling for 15-20 seconds.
CARE AND CLEANING
Open the lid and pour out the water through the orifice. Always remove the
plug from the socket and let the appliance cool down completely. Clean the
outside of the kettle and the base unit with a soft damp cloth, then wipe with
a dry cloth. Do not use any abrasive materials. Remove scale regularly, using
special descaling agents, available at the market, following given
instructions.
FILTER CLEANING
- Remove the filter out of the kettle.
- Place it under a jet of water and rub gently with a soft brush (not included).
- Return the filter to its place.
STORAGE
- Switch off and unplug the appliance; let it entirely cool.
- Complete all requirements of Chapter CLEANING AND CARE.
- The cord can be wrapped around the base area for storage.
- Keep the appliance in a dry cool place.
The symbol on the unit, packing materials, and/or documentation means used
electrical and electronic units and the batteries should not be tossed in the
garbage with ordinary household garbage. These units should be passed to a
special receiving point.
For additional information about the actual system of garbage collection
address to the local authority. Valid utilization will help to save valuable
resources and avoid negative work on the public health and environment which
happens with incorrect using garbage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>