XINKE MINI12 MINI Wireless Smart Earphones User Manual
- June 1, 2024
- Xinke
Table of Contents
XINKE MINI12 MINI Wireless Smart Earphones
Product Introduction
- Charging box*1
- Left and right headphones*1
- Data line*1
- Product specification*1
- Small earcap*1 pair
Specifications
- FCC ID: 2BCJE-MINI
- Pairing Name: MINI
- Charging Interface: Type-C
- Chip Version: 5.3
- Charging Time: About 1-2 hours
Operating Instructions
- Power On:
1. Open the charging case, take out the earphones to turn them on.
2. When turning off, press and hold the function button for 3 seconds.- Shut Down: Insert the earphones into the charging case.
- Binaural Pairing Connection: Follow the steps provided to pair the earphones in binaural mode.
- Clear Pairing: Tap one of the earphone function keys four times when not connected to any device.
Product Usage Instructions
- Volume Control: In music mode, long press the right ear for volume+ and left ear for volume-.
- Switching Songs: Three-click function key on left ear for next song and right ear for previous song.
- Voice Assistant: Four-click function keys on any earphone in connected state.
- Reject/Answer/Hang Up Calls: Press/hang up calls with different combinations on any earphone during incoming call status.
- Play/Pause Music: Double click function keys on any earphone in music mode.
Operation Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
certain conditions as mentioned in the user manual.
FAQ (Frequently Asked Questions)
-
Q: How do I switch between Chinese and English language?
A: When the earphones are not connected to the phone, double-click on one of the earphone function keys to switch between Chinese and English freely. -
Q: How do I clear pairing information?
A: To clear pairing, simply tap one of the earphone function keys four times when the earphones are turned on and not connected to any device. -
Q: What should I do if binaural pairing is not successful?
A: If binaural pairing is not successful, refer to the user manual for troubleshooting tips or contact customer support for assistance.
CONFIGURATION PARAMETER
- Pairing Name: MINI
- Chip version: 5.3
- Charging interface: type-C
- Charging time: About 1-2h
WHAT’S INCLUDE
- Charging box*1
- Left and right headphones*1
- data line*1
- Product specification*1
- Small earcap*1 pair
BINAURAL PAIRING CONNECTION
- Step 1: Delete the information connected to the phone, and then turn off the wireless connection on the phone.
- Step 2: Return the machine to the charging compartment and wait for 30 seconds.
- Step 3: Take out the headphones and wear them on your ears.
- Step 4: TWS will automatically enter pairing mode. After successful pairing, the right channel will flash the main unit light (the auxiliary unit LED will turn off and the main unit light will flash alternately).
- Step 5: Open the wireless connection on your phone.
PS: After the binaural pairing is completed, only one earphone flashes again to indicate successful binaural pairing. If both earphones flash, it means that the binaural pairing is not successful.
Switching between Chinese and English
When the earphones are not connected to the phone, double-click on one of the
earphone function keys to switch between Chinese and English freely.
OPERATION MODE
- POWER ON
- Open the charging case, take out the earphones and immediately turn them on automatically. The voice prompt is “power on” and the light is on for 1 second.
- When the earphones are turned off, press and hold the function button for 3 seconds, and the voice prompt will “turn on” and the light will be on for 1 second.
- SHUT DOWN
- Insert the earphones into the charging case and receive a voice prompt saying “Turn off, light up for 1 second.”
- When the earphones are turned on, the 5-second earphone that is touched for a long time will receive a voice prompt of “turn off” and the light will be on for 1 second.
- Clear pairing
To clear pairing, simply tap one of the earphone function keys four times when the earphones are turned on and not connected to any device.
OPERATING INSTRUCTIONS
-
Volume+
In music mode
Right Ear (R)
Long press for 0.8 seconds
Function keys -
Volume-
In music mode
Left Ear (L)
Long press for 0.8 seconds
Function keys -
Voice Assistant
In connected state
Any earphone (L/R)
Four click function keys -
Reject phone calls
Under incoming call status
Any earphone (L/R)
Press the 1 second
function key -
Play the next song
In music mode
Left Ear (L)
Three click function key -
Play the previous song
In music mode
Right Ear (R)
Three click function key -
Answer/hang up calls
During incoming call status
Any earphone (L/R)
Double click function keys -
Play/pause music
In music mode
Any earphone (L/R)
Double click function keys
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>