Shenzhen Xinke Technology Co Ltd R800 Bluetooth Earbuds User Manual

Shenzhen Xinke Technology Co Ltd R800 Bluetooth Earbuds

Product Information: Bluetooth Earbuds R800

The Bluetooth Earbuds R800 is a wireless earbud device that can be paired with other Bluetooth-enabled devices. It comes with an OP button and a DM button that can be used to control the music playback.
This device complies with part 15 of the FCC Rules, which means that it meets the standards for radio frequency emissions and is safe to use.
For any after-sales support or queries, you can reach out to Cloudless0258@gmail.com.

Product Usage Instructions

1. Open the Bluetooth settings option of the device you want to pair with the earbuds.
2. Select the option to pair a new Bluetooth device.
3. Find the Bluetooth pairing name of the headset R800 and click on it to pair.
4. Once paired, you can start playing music on your device.
5. To play the previous song, press and hold the OP button (this only works when the music is playing).
6. To play the next song, press and hold the DM button (this only works when the music is playing).
   Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Product specifications

• EITecilve distance: ; 1 Om
• Hom diameter. 1Cmm
• Speaker power: 5mW * 2
• Impedance: 32 o
• Microphone sensitivity: 42db ± 3dB
• SNR: ~ 90dB
• Dlstorlbn: ,,e; 3%
• Frequency response: 20Hz – 20KHz
• Playing time: about 6 hours
• Earphone battery capacity: 55mAh
• Battery capadty of charging chamber: 500mAh
  ( All technical data Is subject to actual performance)

List of items

• Bluetooth headset x 2
• Charging line x 1
• Charging box 1
• Instruction x 1
• Earcapx 6

Product precautions

1. Do not try to disassemble or replace the product except for the operating methods that are specially marked in the mal’l.Jal Any parts lnsk:le.
2. This product contains a built-ln rechargeable battery. It Is forbidden to hit, squeeze, puncture, or short-circuit the battery. tfthe current temperature is too high, and deformation, swelling, liquid leakage and other abnormal phenomena, please stop using it and do not piece the battery in the In high-temperature end high-pressure environments such as open flames, sun BlqX)Sure, in heaters, stoves, etc., the battery should not be Immersed In water. Stop use. After using the heads&t, do not place the headset in damp, dust, oily smoke, steam,ln high temperature and high-pressure environments such as direct light, so as not to cause damage to the headset and battery.Tlle battery can be charged and discharged for a limited number of limes, and itwiU eventually age. When the battery is used abnormally, you can replace the battery with a new one. However, do not replace the battery by yourself. If the battery is incorrectly replaced, there Is a danger of explosion. Battery usage.
3. After the product Is scrapped, do notthrtJW”lle product Into the fire, and the waste treatment should be abictty in accordance with the garbage dassificalk>n To process. Please use this product reasonably and correctly, so as not to cause certain harm and environmental damage.
4. During the use of the headset, due to long distances, obstacles In the middle, or other wireless In the case of a SEl’les of Interference such as electrical signal, Bluetooth signal, WIFI signal, etc., IM’len the earphone is in use, for listening to music, watching videos, playing games, etc., 1here will be occasional fre8Z88, unsynchronized voice or disconnection, such as In this case, please reconnect the headset or stay rNayfrom the Interference.
5. When charging the charger, please use a charging device with an output voltage of DC 5V/1A. You must choose to charge equipment that has been certified by a regular manufacturer with CCC safety certification and do not use fast charging Electrical eppliance5, 50 as not to cause too much battery load, and cause battery damage.
   The continuous charging time should not exceed the spectacle charging time, and do not use It Wring charging to avoid damage.

Guidelines for safe and effective use

Note: Please read this information before using the Bluetooth headset.
If the user changes or modifies this Bluetooth headset without. permission, he will lose the continued enjoyment.
Have the right to the services included in the device. <!Electromagnetic Interference:
Electronic equipment: To avoid the Influence of electromagnetic interference or com”figuration incompatibility, please Tum off your Bluetooth device n accordance with the regulations.
Civil Aviation: After boarding, please tum off)OOr Bluetooth headset according to the instructions of the flight attendant. It is strictly
forbidden to use Bluetooth headsets in flight to avoid interference with the aircraft communication system.

safety matters:
Placement: It is recommended that you place the Bluetooth headset in a place where it will net be S<JJ99Zed when not using it.
Pressure may cause pro:::luct damage or personal injury. Chik:lren: Don’t let children play with Bluetooth headsets, sone of the smaa parts are detachable and may be swallowed-Swallow and cause danger.

Product operation instructions

1. Power on:
   Method 1 : open the cover of the charging compartment, and the headset wll automatically start b pair. Method 2: when the headset is turned off (outside the charging compartment), long press the left and right headset multifunction buttons for about 2 seconds, ard the headset Is turned on.

2. Power off:
   Method 1: Put the headset In the on state directly Into the charging compartment end close Ile cover of the charging compartment. The headset wll automatically shut down and enter the charging mode. Method 2: long press the left and right earphone multifunction keys in the power-on state for about 5 seconds, and the earphone will be tumecloff.
   Note : when the headset Is turned on, ltwlll eutometlcally tum off If It is not paired with the corresponding Bluetooth device for 3 minutes; Beyond the effective connection distance of the signal, not connected with the corresponding Bluetooth device, 3 minutes later,
   the headset will automatically.m off.

3. TWS pairing:
   a. When there Is no pairing record between the left and right earphones, the left and right earphones will be paired eulometlcally after they are turned on
   b. When the left and rlgrt earphones have matching records, they will be automatically connected back when they are turned on.

4. Automatic switch between left and right ears:
   a. In the process of using the headset, put the left (right) ear Into the charging tJox to charge, and II WIii automatically switches to the r1ght (left) ear1o play (and continue to maintain the music state before switching).
   b. In the process of using the earphone, put the left (right) into the charging box for charging, which will not affect the normal operation Of the right (left) ear
   c. After lWS connection, when anyone ear Is In use, take out ar, another headset to automatically connect TWS, and the left and right ears continue to work.
   d. Tum on the left or right ear separately to connect the mobile phone back.

5. Pairing with Bluetooth devices
   Open the Bluetooth setting option of the Bluetooth device to be paired, enter the option, find the Bluetooth pairing name of the headset “R800”, and click the pairing name to pair.

6. Play music:
   Previous song: Press and hold the OP button (only works when the music is playing) Next song: Press and hold the DM button (only works when the music is playing) Volume plus: dick any headset DM mechanical key once Volume reduction: click any earphone OP mechanic:al button once Pause I play: briefly press any earphone multifunction button once

7. Hands-free telephone (paired operation of two earphones):
   Answer an Incoming call: cllck any headset multifunction button once In cased Incoming call, reject: long press any earphone multifunction
   button for 2 seconds End the caU and hang up: when the call is connected, click any headset multifunction button once
   

8. Hands-free (single headset operation):
   Answer an Incoming call: click the headset multi.action button once Reject the Incoming call: long press the multl-function button of the headset for 2 seconds
   End the call encl hang up: dick the headset multifunction button once

9. Activate voice assistant:
   Voice assistant activation: Press and hold any headset multi-function button for 2 seconds to activate the intelligent voice function.
   Game mode swik:h: click any headset multi-function button four times in a row to switch between game mode and music mode.

10. Indicator light display:

    • Headset on: (left) The right headset indicator light is flashing alternately while and green.
    • Headset off: (left) right headset indicator light flashes while and green 3 times and then goes off.
    • Pair of ear teaming success: (left) the left (right) headset light Is alternately flashing white and green, (right) the left headset light Is off.
    • Disconnected pairing: (left) right headset indicator light flashes white and green alternately.
    • Bluetooth pairing successful: (left) right headset indicator light off.
    • Bluetooth disconnection: left (right) headset indicator light is whie and green, (right) left ear Indicator light Is off. Charging bin to the headset charging: charging bin In the process of charging the headset, the headset indicator light is always on white; open the digital display 8allen switch, display charging power, battery abip shows charging status, when fully charged, and the headset indicator light off, charging bin digital display screen off no display.
    • Charging the charging compartment: during the charging of the cha-ger tothe charging compartment, the charging compartment digital display shows mal-time charging, the power level and fleshes with a single-digit value, when fully charged the charging compartment power level is shown as 100%.

After-Sales Email: Cloudless0258@gmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>