Xinke K-29 Small Space Robot Speaker User Manual

Xinke K-29 Small Space Robot Speaker

Thank you very much for choosing K-29 Bluetooth speaker, please read the instructions carefully before use, correct operation and use, better play the superior performance of the product.

Product introduction

1. Key switch
2. Megaphone
3. Type-C Indicates the interface

Product parameter

• Product name: Small space robot speaker
• Operating voltage: 3.7V
• Input:SV = lA
• Product size: 106mm x 90mm x 127mm
• Charging time: 3+-0.5 hours
• Product model: K-29
• Maximum output power:3W
• Battery capacity: ICR18650 800mAh
• Bluetooth frequency: 2.4GHZ
• Audio playback time: Medium volume about 6 hours

Product Features

1. Support bluetooth music playback
2. Support bluetooth back connection function
3. Support hands-free call function
4. Support the connection function

Operation instruction

1. Key instructions (basic version):

   • Press and hold the button for 5 seconds to turn on/off.
   • Click Pause/Play.
   • Press and hold for 1-2 seconds to connect two machines (TWS).

2. Key instruction {color version) :

   • Press and hold the button for 5 seconds to turn on/off.
   • When powering on, the bright light will automatically flash 4 modes to switch. After the Bluetooth connection is successful, the lights will flash according to the size of the music playing.
   • Double-click the button to switch the light flashing mode:
   • Mode 1: Running from left to right;
   • Mode 2: From the center to the left and right sides of the horse;
   • Mode 3: Running from right to left;
   • Mode 4: Run from left and right to center.

3. Charging instructions:
   TYPE-C charging cable with external 5V/1A charger. When charging, the MIC hole position red indicator lights up. Full blue light is on.
   Note : The machine is charged in the off state, about 3 hours full. It takes 6 hours to charge in working condition. This unit has built-in rechargeable lithium-ion battery, please charge it before use.

4. Pairing operation instruction:

   • Long press the switch button, Bluetooth pairing name: K-29.
   • Press and hold for 1-2 seconds to connect two machines (TWS).
   • When the product is not connected to the Bluetooth device, it will automatically shut down in 6 minutes.
     Reset: When the machine cannot be connected or shut down, long press the button for 10 seconds, and you can reset and restart the function.

Attention

1. About Bluetooth use environment:
   Wireless signal transmission, including Bluetooth, is greatly affected by the surrounding environment, such as metal, trees, human bodies, walls and other obstacles will have a certain absorption of the signal. Therefore, in practical applications, the transmission distance will have a certain impact.

2. Charging precautions:
   Do not charge batteries under fire and heat conditions! Do not use this product near heat sources such as fire or heaters. Do not put the host in an extremely hot environment, such as direct sunlight or hot days inside the car. Otherwise, it will reduce the performance of the battery or shorten the service life of the battery.

3. Battery Precautions:
   If you do not use the battery for a long time, please charge more than 50% of the battery first, and then store it safely. 4. Storage products should be purchased in an indoor warehouse with a temperature of 25 degrees and humidity of no more than 75% to minimize the capacity attenuation of the battery cell.

4. Product storage precautions:
   The storage product should be purchased in an indoor warehouse with a temperature of 25 degrees and humidity of no more than 75% to minimize the capacity attenuation of the battery cell.

5. Transportadon precautions:
   Transportation products should be rainproof and flooded during transportation to prevent long-term stacking in high-temperature environments.

Product standard

San Bao certificate

1. Keep the warranty card as proof of maintenance
2. The warranty period is six months from the date of purchase.
3. During the warranty period, if the product fails under normal use, it will be repaired free of charge if verified by the company.

The following conditions do not provide free repair
The company’s products carry out limited warranty within the warranty period. Equipment failure or damage under the following circumstances is not included in the limited warranty, and the company does not undertake free warranty obligations;

1. the equipment or parts have exceeded the valid warranty period.
2. the customer does not in accordance with the requirements of the manual, the wrong installation, storage and use caused by equipment failure or damage.
3. Equipment failure or damage caused by disassembly by institutions or personnel not authorized by the Company.
4. due to accidental factors or human reasons (including but not limited to operation errors, scratches, handling, bump, input inappropriate electricity Voltage current, etc.) caused by equipment failure or damage.
5. due to natural disasters and other force majeure (such as earthquake, fire, etc.) caused by equipment failure or damage.

Battery waste Instructions:

1. Before discarding the appliance, the battery must be removed from the appliance (remove the upper and lower covers of the product with a screwdriver).
2. The appliance must be powered off when removing the battery (remove the battery safely from the product)
3. The battery should be disposed of safety (dispose the battery according to the national environmental protection requirements to avoid pollution)

Product warranty card

• User Name:
• Purchase time:
• Contact information:
• User address:
• Breakdown:

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>