XINKE MH22176 Bluetooth Earbuds User Manual
- July 10, 2024
- Xinke
Table of Contents
XINKE MH22176 Bluetooth Earbuds
Product Usage Instructions
Putting on the Earbuds
Put the ear hook behind the ear and rotate the headset until it fits your ear comfortably.
Power On/Off
The earbuds are automatically powered on when the case is opened. To power off, place the earbuds into the case and close the lid.
Bluetooth Connection
elects “OPENEAR B1” in your Bluetooth menu to connect. You will receive a prompt once connected.
Answer/Hang Up/Reject Calls
To answer or hang up a call, click once on any earbud. To reject a call, hold on for 1.5 seconds on any earbud.
Music Controls
To play/pause music, click once on any earbud. For the previous track, click three times on the left earbud; for the next track, click three times on the right earbud.
Volume Control
To adjust volume, click twice on the right earbud for volume up, and twice on the left earbud for volume down.
Voice Command Activation
Hold on for 2 seconds on any earbud to activate your device’s voice assistant.
Low Battery Alert and Charging
The white LED flashes when the earbud battery is lower than 10%, indicating a low battery. To charge, place the earbuds into the charging case. The green LED will be on while charging and turn off when fully charged.
Charging Case LED Display
The digital display in the charging case shows the remaining battery of the case. Use a DC 5V adapter and Type-C charging cable for charging.
FAQ
- Q: How do I know if the earbuds are fully charged?
- A: The LED indicator on the charging case will turn off when the earbuds are fully charged.
- Q: Can I use voice commands to control music playback?
- A : Yes, hold on for 2 seconds on any earbud to activate your device’s voice assistant for music playback control.
Headphones
Specifications
- Model: MH22176
- Type: Truly Wireless Open Ear Headphones
- Version : 5.3
- Connection: 10m
- Weight : 20g (10g each earbud)
- Earbud Play Time: 4.5H (80% volume)
- Earbud Charging: 1.5H
- Case Charge Earbud : 2 Times
- Case Charging : 2H
- Charging Voltage: DC 5V
How to Wear
- Put the ear hook behind the ear and rotate the headset until it fits your ear
Operations
-
Power On/Off
- The earbuds are automatically power on when opening the case. Prompt: power on pairing; Place the earbuds into the case and close the lid of case to power off.
- Prompt: power off.
-
BT Connection
- Select “OPENEAR B1” in the BT menu to connect.
- Prompt: connected.
-
Answer/Hang Up/Reject A Call
- Answer/Hang Up A Call: Click 1x of any earbuds.
- Reject A Call: Hold on to 1.5s of any earbuds.
-
Play/Pause Music
Click 1X of any earbuds. -
Previous/Next Track
- Previous Track: Click 3X of the Left earbud.
- Next Track: Click 3X of Right earbud.
-
Volume Up/Down
- Volume Up: Click 2X of Right earbud.
- Volume Down: Click 2X of the Left earbud.
-
Activate Voice Command
- Hold on for 2s of any earbuds to activate the voice assistant
-
Low Battery
- The white LED flashes when the earbud battery is lower than 10%, prompt: battery low.
-
Charge
- Place the earbuds into the charging case. The green LED is on while charging. The LED is off when fully charged
-
Charging Case LED Display
- The digital display in the charging case represents the remaining battery of the charging case. Please use the D 5V adapter and Type-C charging cable to charge.
Attention
- Listening to loud music for a long time may cause discomfort, please use medium volume if possible. Do not use high volume for long periods of time.
- Using headphones will affect your perception of the surrounding environment. Pay more attention when using headphones.
- Do not remove or modify the headphones, as this may cause damage or burnout.
- Do not throw, twist on headphones or put them into a fire.
- Keep it away from fire,hydration, and high-pressure equipment.
- Not suitable for children under 10 years old and containing small parts.
- Do not classify it as household waste. Please send it to the local electrical equipment recycling station.
Note : The company does not assume any responsibility for the loss of personal property caused by the violation of the above warnings.
FCC STATEMENT
warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However.
there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE : This device and its antenna(s)must not be co- located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>