JHS 3 Series Octave Reverb Instructions
- June 3, 2024
- jhs
Table of Contents
JHS 3 Series Octave Reverb
WARRANTY INFO
Thanks for buying a JHS 3 Series Pedal. This pedal is backed by a 6 month limited warranty in the USA. Outside of the USA, various international distributor warranty policies may supersede our original manufacturer’s warranty. If you are concerned about a potential faulty, defective, or broken product please contact support@jhspedals.com or contact the original place of purchase. Thanks again for purchasing a JHS pedal. We are proud to stand behind what we create for you!
REGISTRATION INFO
Registration of purchase is required for Manufacturer’s Warranty coverage. To register your product, please visit: www.JHSpedals.info/warranty- registration
CONTROLS
- VERB – Controls the amount of reverb. Left is less, right is more.
- OCTAVE – Allows you to blend the octave amount in the reverb. Left is mild, right is more extreme.
- DECAY – Controls the length of the reverb trail. Left is shorter, right is longer.
- UP/DOWN – Selects if the reverb octave is one octave up or down.
JACKS
- INPUT – 1/4” jack on the right side of the pedal. OUTPUT – 1/4” jack on the left side of the pedal.
- POWER – Requires 9V DC negative center power and consumes 70mA. Do not use more than 9V DC. You will void your warranty.
Scan QR code for
more translations and information or visit
jhspedals.info
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>