JHS PEDALS 539090 Overdrive Preamp Pedal Instructions
- June 5, 2024
- JHS PEDALS
Table of Contents
JHS PEDALS 539090 Overdrive Preamp Pedal
OVERDRIVE PREAMP
JHS Overdrive Preamp is a faithful recreation of an extremely rare (read: practically unknown) first version of the DOD 250 Overdrive Preamp. If you love the 250 and are familiar with the legendary Gray Box and Yellow Box versions, this is a musthave addition to your collection. The JHS Overdrive Preamp is a powerful tone shaping tool that can be used as a solo boost, always on preamp, transparent overdrive or distortion. No matter the musical genre or which amps or pedals you have in your chain, the Overdrive Preamp is the pedal for you.
CONTROLS
LEVEL – “Level” adjusts the overall output of the circuit and lets you
cut or boost the signal.
GAIN – “Gain” adjusts the amount of gain inside the overdrive circuit.
Turning up “Gain” creates more clipping as it pushes the op-amp and hard
clipping into overdrive.
SLIDER – This slider switch allows you to explore two variations within
the V1 clipping arrangements. The slide switch DOWN replicates the clipping
from the earliest version ever found (this mode is the most distorted and
saturated of the two). The slide switch UP uses the clipping arrangement found
in a later serial number (this mode is a bit more open, louder and more
clear).
POWER – Can be powered between +9 to +18 DCV center negative. Do not use
more than +18 DCV. Your warranty will be voided. 5mA current consumption.
DOD IS A REGISTERED TRADEMARK. THE JHS PEDALS OVERDRIVE / PREAMP IS IN NO
WAY AFFILIATED WITH OR ENDORSED BY DOD.
Documents / Resources
| JHS
PEDALS 539090 Overdrive Preamp
Pedal
[pdf] Instructions
539090, Overdrive Preamp Pedal, 539090 Overdrive Preamp Pedal
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>