Shenzhen Jhs Technology P30-AM Radio LCD Screen User Manual
- June 8, 2024
- Shenzhen Jhs Technology
Table of Contents
Shenzhen Jhs Technology P30-AM Radio LCD Screen
Functional specification
- The radio has FM, AM, BT and MP3 playback functions.
- Power switch function Press and hold the POWER key for one second to turn on the radio. The radio is in the power on state. Press and hold for one second to enter the standby mode (time and date will be displayed on the screen). According to the software, press and hold for another second to turn off the radio; When the radio is turned on, briefly press the POWER key to lock the screen. At the same t ime, the lock symbol on the LCD screen lights up. When the screen is locked, long press the POWER key to unlock the screen. At this time, the radio can operate normally.
- VOL+ Dial When the radio is turned on, you can adjust the volume of the radio by ro tating the dial (there is also a corresponding prompt on the screen) or slowly rotate it to increase and decrease the volume step by step.
- Up and down move key In radio mode, short press is used to flip up and down (to browse through stored stations), lo ng press is used to quickly search up and down from the current frequency; In BT and MP3 playback, short press up and down move key, is to play the last song or the next song function.
- Triangle play key: during radio reception, long press is used as the one button channel search function, which automatically searches from low frequency to high frequency. The station found will be automatically memorized and saved, and short press is used as the mute function; A short press during BT and MP3 is used for pa use and play.
- M key, short press to switch various playback modes, FM,AM,BT,MP3, when the current character is lit, it means the current playback mode.
- TYPE C Charging The radio is charged through the TYPE C terminal. When the outer frame of the batter y symbol flashes, it indicates that the battery needs to be charged in a timely manner due to low power; When charging, the whole battery symbol flashes; When the whole battery symbol stops flashing, the battery is fully charged.
- In standby mode, you can use the M key, up/down movement key and play key to set the time and alarm
- The radio has a built in aluminum telescopic antenna.
- The radio has a built in high quality loudspeaker output, which can also be connected to the headphone output.
- The radio is equipped with a removable high capacity polymer battery.
- Radio signal display, according to the current location of the radio environment to display the strength.
- KHZ and MHZ are displayed according to the radio mode and frequency.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesi red operation.
FCC
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not insta lled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the s eparation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction
DIMENSIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>