JHS PEDALS Artificial Blonde Artist Signature Pedals Instructions
- June 9, 2024
- JHS PEDALS
Table of Contents
ARTIFICIAL BLONDE
Artist Signature Pedals
Instructions
Artificial Blonde Artist Signature Pedals
Out of all the artist signature pedals we’ve done, this is the most signature.
Simply put, the Artificial Blonde gives you Madison Cunningham’s foundational
and always on modulation tone.
If you love the sound of vintage vibrato, look no further.
CONTROLS
VOLUME – Controls the overall volume of the pedal. Left is less, right is
more.
EQ – The EQ control is an active tilt EQ. Noon is flat. Turning to the
left boosts lows and cuts highs, while turning to the right boosts highs and
cuts lows.
SPEED – Controls the rate of the vibrato. Left is slower, right is
faster.
DEPTH – Controls the depth of the vibrato. Left is less, right is more.
JACKS
INPUT – 1/4” jack on the top right receives your instrument’s signal.
OUTPUT MONO/STEREO – 1/4” jack outputs. Use the MONO output for a mono
signal path or use both the MONO and STEREO output jacks for a 3D stereo
soundscape.
POWER – Uses 9V DC Negative Center. Do not use more than 9V DC. Your
warranty will be voided. 138mA consumption
SWITCHES
BYPASS – Left footswitch turns the effect on and off.
PRESET – Right footswitch changes the preset to A or B. On power up the
default is preset B.
Each preset has the same speed and depth range and allows you to create two
different switchable settings.