AUTLED LC-002-061 LED RF Controller RGBW Set User Manual
- June 6, 2024
- AUTLED
Table of Contents
LED RF Controller RGBW Set – User Manual 
Item No.:
LC-002-061
Product Description
The remote and its receiver is a one-zone RF wireless RGB Controller. The Controller can also, work with a data repeater to expand output unlimitedly.
Performance Parameter
Remote:
| Operation Voltage | 3x 1,5 VDC Batteries (3xAAA Batteries) |
|---|---|
| Operation Frequency | 434MHz/868MHz/915MHz |
| Dimensions (L x W H) | 120 x 48 x 17,6mm |
| Operation mode | RF Wireless |
Receiver:
| Input Voltage | 12V-24VDC, Constant Voltage |
|---|---|
| Max. Output Power | 4 Channels x 5A (240W/12V) or (480W/24V) |
| Dimensions IL x W H) | 145 x 46,5 x 16mm |
| weight | 70g |
Features
- Power on and power off
- Activate a desired color by the color wheel
- Activation of 10 different fix-stored color gradients
- Activation of 3 fixed stored RGB white colors
- Dimming of desired colour and color gradients
- Speed changing and freeze of color gradients
- Switch on/off and dimming of the 4 channels RGBW and total dimming of the adjusted RGB color.
- One receiver can be paired with max. 8 different remote controls
Operation Manual
4.1. Connection of Remote with the Receiver:
a) Do wiring according to the wiring diagram
b) Wake up the remote control by pressing the ON/OFF button.
c) press shortly the „RF Pairing Key“ button on the receiver.
d) Touch the color wheel on the remote.
e) Connected LED light will flash to confirm matching was successful.
f) If you wish to delete the learned ID, please press the „RF Pairing Key“
button on the receiver for 5 seconds until the LED light flashes up, the
learned ID is deleted.
4.2. Description of the remote buttons:
Wire Diagram
Safety warning
6.1. To avoid installing the product in a minefield, strong magnetic field,
and high voltage area.
6.2. To ensure the wiring is correct and firm avoiding short circuit damages
to components and causing a fire.
6.3. Please install the product in a well-ventilated area to ensure an
appropriate temperature environment.
6.4. The product must be worked with a DC constant voltage power supply.
Please check the consistency of input power with the product, if the output
voltage of the power complies with that of the product.
6.5. Connecting the wire with the power on is forbidden. Ensure proper wiring
first then check to ensure no short-circuit, then power on.
6.6. Don‘t repair it by yourself whenever an error occurs. Contact the
supplier for any inquiry.
Remarks
7.1. Power source must be DC constant voltage type of power supply. Due to the efficient output in some power supplies being only 80% of the total, so please select at least a 20% higher output power supply than the consumption of LED lights.