PETCUBE Play 2 Smart Pet Camera with Laser Toy User Guide

June 12, 2024
Petcube

PETCUBE-logo

PETCUBE Play 2 Smart Pet Camera with Laser Toy

Product Information

Safety Instructions
For more information about safety and handling, please refer to the user guide.

  1. Do not drop, hit, or shake your Petcube Play 2.
  2. Do not stain, scratch, or otherwise damage the front camera glass.
  3. Do not expose to liquid, moisture, dust, excessive heat, or open flames.
  4. To avoid overheating, do not leave Petcube Play 2 in direct sunlight.
  5. Petcube Play 2 should not be used by minors without supervision from an adult.
  6. Protect the power cord from being walked on, pinched, or chewed on by pets.
  7. The socket-outlet shall be installed near the equipment and shall be easily accessible.

Product Usage Instructions

  1. The adapter is used for office machines and data processing appliances. It is certified according to the relevant safety standards UL 62368-1, CSA 022.2 No. 62368-1.
  2. The output power taken from the supply must not exceed the rating given on the adapter.
  3. The adapter is not intended to be repaired by service personnel in case of failure or component defect (unit can be thrown away).
  4. The disconnection from line voltage is made by main plug.
  5. The frequency bands in which the radio equipment can operate are 2412.0 – 2462.0 MHz.

Contact
For any assistance with the device, please contact us directly at: [email protected].
We’ll resolve any issue ASAP. Pet parents’ experience is our top priority.

Product Info
Petcube user guide: The explanations provided in this guide are for informational purposes only and may be modified. The latest version of this guide can be found here.

Software: Your Petcube Play 2 connects to Petcube, Inc. copyrighted software to control its operation.

Warranty: When Petcube Play 2 is purchased new through Petcube authorized resellers, it is warranted against defects in materials and workmanship under normal use. Full terms can be found here.

Terms of Use: For more information, please visit here.

FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only use the power supply provided.

ISEDC RSS Warning
Canadian Compliance Statement: This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

SETUP

  1. Download the Petcube App and register your account
    PETCUBE-Play-2-Smart-Pet-Camera-with-Laser-Toy-FIG-
\(1\)

  2. Power up the camera and wait for yellow light to flash

  3. Press the Setup button at the bottom until you hear a sound

  4. Follow instructions in the app to finish the setup

PLACEMENT

PETCUBE-Play-2-Smart-Pet-Camera-with-Laser-Toy-FIG-
\(7\)

It’s best to point Petcube Play 2 in the direction where your pets spend most of their time so their activities are captured with the wide-angle lens.
If placing on a table or a shelf, put Petcube Play 2 at least 3 feet above the floor. A rubber foot at the bottom provides a firm grip on the surface.

Place Petcube Play 2 in a position for maximum room coverage through the wide angle lens

PETCUBE-Play-2-Smart-Pet-Camera-with-Laser-Toy-FIG-
\(3\)

Petcube Play 2 comes with a standard tripod screw mount on the bottom

LIGHT STATUS

  • Pulsing blue
    Cam is streaming video

  • Blue blinking once
    Cam recording started

  • Solid blue
    Cam is online

  • Fast flashing blue
    Connecting to the cloud, finishing setup

  • Flashing blue and yellow
    Connecting to the router

  • Solid yellow
    Cam is booting up

  • Fast flashing yellow
    Device is ready for setup

  • Pulsing yellow
    Connection or system error

SAFETY INSTRUCTIONS

For more information about safety and handling, please see https://petcube.com/support/play2/user-guide/
To avoid injury or harm, read all safety information and operating instructions prior to using Petcube Play 2.

  1. Don’t drop, hit, or shake your Petcube Play 2.
  2. Don’t stain, scratch, or otherwise damage the front camera glass.
  3. Don’t expose to liquid, moisture, dust, excessive heat, or open flames.
  4. To avoid overheating, don’t leave Petcube Play 2 in direct sunlight.
  5. Petcube Play 2 should not be used by minors without supervision from an adult.
  6. Protect the power cord from being walked on, pinched, or chewed on by pets.
  7. The socket-outlet shall be installed near the equipment and shall be easily accessible.
  8. Maximum ambient temperature around the adapter must not exceed 40° C.
  9. The adapter is used for office machines and data processing appliances. It is certified according to the relevant safety standards UL 62368-1, CSA 022.2 No. 62368-1.
  10. The output power taken from the supply must not exceed the rating given on the adapter.
  11. The adapter is not intended to be repaired by service personnel in case of failure or component defect (unit can be thrown away).
  12. The disconnection from line voltage is made by main plug.

The frequency bands in which the radio equipment can operate -2412.0 – 2462.0 MHz.

CONTACT

For any assistance with the device, please contact us directly at: [email protected]
We’ll resolve any issue ASAP.
Pet parents’ experience is our top priority.

Share your feedback

PRODUCT INFO

Petcube user guide
The explanations provided in this guide are for informational purposes only and may be modified. The latest version of this guide can be found at
https://petcube.com/support/play2/user-guide/

Software
Your Petcube Play 2 connects to Petcube, Inc. copyrighted software to control its operation.

Warranty
When Petcube Play 2 is purchased new through Petcube authorized resellers, it is warranted against defects in materials and workmanship under normal use. Full terms can be found at https://petcube.com/docs/warranty / https://petcube.com/care

Terms of use
For more information please visit https://petcube.com/docs/terms-of-use/

FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmit ter. Only use the power supply provided.
ISEDC RSS Warning. Canadian Compliance Statement
This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunct with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Declaration of Conformity
Hereby, Petcube Inc. declares that this Petcube Play 2 is in compliance with Directive 2014/53/EU and Radio Equipment Regulation 2017. The full text of the declaration of conformity is available at the following intern et address:
https://petcube.com/docs/declaration-of-conformity-petcube-play2

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Petcube User Manuals

Related Manuals