Outsunny 84C-505V00 4 m x 3 m Gazebo Party Tent Outdoor Canopy Garden Instruction Manual

: June 5, 2024
: Outsunny

Table of Contents

Outsunny 84C-505V00 4 m x 3 m Gazebo Party Tent Outdoor Canopy Garden
Product Information
Product Usage Instructions
PARTS
INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Outsunny 84C-505V00 4 m x 3 m Gazebo Party Tent Outdoor Canopy Garden

Product Information

Specifications:

Model: IN230900553V01_GL
Product Code : 84C-505V00
Dimensions: 20cm x 15cm x 10cm
Weight: 500g
Material: Plastic
Color: Black

Product Usage Instructions

Step 1: Unboxing and Setup

Remove the product from the packaging and ensure all components are included.

Step 2: Assembly

Follow the assembly instructions provided in the manual to put together the different parts of the product.

Step 3: Power On

Connect the product to a power source using the provided cable and turn it on using the power button.

Step 4: Configuration

Adjust the settings as per your preferences by following the on-screen instructions.

Step 5: Operation

Use the product according to its intended purpose. Refer to the user manual for specific functions and features.

FAQ

Q: How do I clean the product?
- A: Use a damp cloth to gently wipe the surface of the product. Avoid using harsh chemicals.
Q: What should I do if the product stops working?
- A : Check the power source and connections. If the issue persists, contact customer support for assistance.
Q: Can this product be used outdoors?
- A: This product is designed for indoor use only.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Dear customer,

Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center, Our contact details are below:

WARNING

Find a flat and stable surface large enough to set up the folding pavilion. Carefully take the tent frame out of the bag and place it on a dry surface (sand, grass or firm surface).
Follow these instructions carefully to avoid getting your hands and fingers caught in the moving parts of the frame when opening and closing the frame. You need at least two people to safely assemble and dismantle the folding pavilion. Do not try to set up the tent by yourself, as pulling on one side can overload the tent legs and damage them unnecessarily. To avoid damage, the tent must be pulled out in tandem.
In windy conditions, secure the tent using the ropes attached to each side of the canopy. Attach the ropes to the pegs at a 30-degree angle and anchor them to the ground with a hammer. If the canopy is placed on a hard surface, secure the 4 sides with bricks or sandbags.
Do not set up the pavilion in windy weather conditions. This can lead to injuries and/or damage to your tent.
Do not use chemical additives to clean the roofs and side walls. The water temperature can be a maximum of 30°C.
Make sure that you pack the folding tent dry and store it upright in the bag provided in a dry place. A damp tent can get mold stains.
No liability is accepted for damage caused by improper storage or\ cleaning.
Please take appropriate actions as heavy rain, wind, and snow can damage the tent. If necessary please disassemble and store for later use.
In snowy conditions please do not allow the thickness of the snow to be more than 5cm on the roof, this should be cleared as soon as possible for your safety.

PARTS

INSTALLATION

Erectthe frame and half-open it.
Place the small canopy fabric on the frame. Install the four corners of the fabric onto the plastic parts of the bracket.
Place the canopy fabric on the frame and align the four corners of the canopy fabric with the four corners of the frame.
Install the four corners of the fabric onto the pipes at the four corners of the bracket.
Attach the canopy fabric to the frame with the loop fasteners. Push up the central locking system until it locks into place and the entire frame is fully extended. After setting up the canopy fabric. Please reinforce the fabric to the frame with the loop fasteners inside the canopy.
Fix the rope on the small iron plates of the four support pipes.
3 adjustable heights.
When assembling, please completely attach the of the wall as well as the door to the canopy fabric of the top before zipping the walls down.
Connect the canopy fabric and the ground anchors with ropes, and fix the anchors into the ground for added stability.

CONTACTS