COUGAR AIRFACE RGB User Guide

COUGAR AIRFACE RGB

FEATURES

• Perforated design for unobstructed ventilation
• Innovative quick slide dust filter
• Integrated RGB system with 5V ARGB motherboard synchronization
• Support for E-ATX motherboard
• Up to 330 mm graphics cards
• Up to five fans and 190 mm CPU cooler

ASSEMBLY DRAWING

• A – Airflow front panel
• B – Quick slide dust filter
• C – 2 x 120mm / 2 x 140mm fans for front panel(140mm ARGB fans x 2 pre-installed)
• D – Air filter for bottom panel
• E – Tempered glass side panel
• F – Vertical slot covers
• G – 1 x 120mm / 1 x 140mm fan for rear panel (120mm ARGB fan x 1 pre-installed)
• H – Air filter for top panel
• I – 2 x 120mm / 2 x 140mm fans for top panel
• J – 2.5”SSD tray
• K – Right side panel
• H – 3.5”HDD cage

SPECIFICATIONS

Cooling  Fan Support

| Front  : 120mm x 2 / 140mm x 2  (140mm ARGB fan x 2 pre-installed)
Top : 120mm x 2 / 140mm x 2
Rear : 120mm x 1 / 140mm x 1  (120mm ARGB fan x 1 pre-installed)
Maximum  Number of Fans| 5
Water  Cooling  Radiator Support| Front  : 280mm / 240mm / 140mm / 120mm
---|---
Top    : 280mm / 240mm / 140mm / 120mm
Rear   : 140mm / 120mm
Transparent Left Panel| 4mm  Tempered Glass
Onboard Lighting System| Yes
RGB Sync with M/B| Yes
ARGB LED strip ARGB LED ARGB LED| Yes
Max. Graphics Card Length| 330(mm) / 13(in)
Max. CPU Cooler Height

CPU

| 190(mm) / 7.5(in)
Max. PSU Length| 160(mm) / 6.3(in)

• E-ATX up to 277 mm wide.
• Please choose either front or top to install a 280 mm radiator.
• Max. length of RTX 3090 graphic card is 325 mm

INSTALLING THE I/O CONNECTORS

| | | | |

ACCESSORY KIT

| 3.5″ HDD screws| X 8
---|---|---
| Motherboard screws and 2.5″ SSD screws| X 17
| Power supply screws| X 7
| Stand off for motherboard and VGA riser cable| X 5
| 3.5” HDD cage  screws| X 1
| Cable  ties| X 6
| | Fan splitter cable| | X 1

REMOVING PANELS

INSTALLATION

INSTALLING WATER COOLING RADIATORS & COOLING FANS

• Please choose either front or top to install a 280 mm radiator.
• 280 mm
• 280 mm

1. Top
2. Front
3. Rear

INSTALLING THE 3.5″ HDDS

INSTALLING THE 2.5″ SSDS

CONTROLLING LIGHTING MODES

FIRST MODE: SEVERAL LIGHTING EFFECTS
You can use the top panel’s RGB button to switch between several beautiful lighting effects we have preset for you.

RGB SW botton

• A – 5V Addressable RGB adapter
• B – Power connector
• 1 – 6 5V Addressable RGB connector

SECOND MODE: MOTHERBOARD SYNCHRONIZATION

Please use the included adapter to connect to a compatible motherboard’s 3-pin 5V Addressable RGB header. Then, press and hold the RGB SW button for 3 seconds. The lights will flash in white once, it means the light signal has been changed to motherboard synchronization mode.

SECOND MODE
Motherboard synchronization

• Press and hold the RGB button for 3 seconds

BACK TO FIRST MODE
Several Lighting Effects

• Press the RGB button for one second.

If you press and hold the RGB button for 6 seconds, the lights will flash in white for twice, and the lights will be turned off.
The lighting controller has memory function after REBOOTING. However, if you press and hold for 6 seconds and return on the light again, it will only return to the first light mode of default, and it cannot memorize the light effect before it was turned off.

INSTALLING GRAPHIC CARD

GLOBAL WARRANTY POLICY
WARRANTY PERIODS OF COUGAR GAMING DEVICES / COUGAR
Product: COUGAR AIRFACE RGB
Warranty : 1 Year

• This warranty gives you specific legal rights. You may also have other rights granted under local law.These rights may vary.
• Only for electrical components

www.cougargaming.com

COUGAR USA Technical Service
Tel : 833-256-3778
Mail:rma@compucaseusa.com

Compucase Enterprise Co.,Ltd. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>