COUGAR MX330-G Pro Full Mesh Mid Tower Case with Powerful Airflow Installation Guide
- October 30, 2023
- Cougar
Table of Contents
MX330-G
PRO
FEATURES
- Mesh Front Panel with Powerful Airflow
- Support for ATX Motherboards
- Massive Tempered Glass Side Window
- Supports up to 385mm Graphics Cards
- Supports up to 7 Fans and 160mm CPU Cooler
- Supports up to a 360mm Water Cooling Radiator
ASSEMBLY DRAWING
ASSEMBLY DRAWING
A | Power button / RGB button |
---|---|
C | Front panel |
E | Tempered glass side panel |
G | Slot covers |
I | 3.5” HDD cage (compatible for 2.5” SSD) |
K | 3 x 120mm / 2 x 140mm fans for top panel (optional) |
B | Type C 3.1 / USB 3.0 / USB 2.0 / 4 Pole Headset Audio Jack |
D | 5.25″ ODD cover |
F | Right side panel |
H | 2.5” SSD tray |
J | 3 x 120mm / 3 x 140mm fans for front panel (optional) |
L | 1 x 120mm fan for rear panel |
N | Air filter for bottom panel |
M | Air filter for top panel |
O | 5.25” ODD mounting bracket |
SPECIFICATIONS
Product Name | MX330-G Pro |
---|---|
Case Form Factor | Mid Tower |
Motherboard Type | Mini ITX / Micro ATX / ATX |
Dimension | 209 (W) x 495 (H) x 475 (D) (mm) / 8.2 (W) x 19.5 (H) x 18.7 (D) |
(in)
I/O Panel| Type C Gen 2 (Key A 20-pin connector) x 1, USB 3.0 x 2, USB 2.0 x
1,
4 Pole Headset Audio Jack x 1, Reset Button
5.25“ Drive Bay| 1
3.5″ Drive Bay| 2
2.5″ Drive Bay| 3+1 (converted from 3.5“ drive bays)
Expansion Slots| 7
Cooling Fan Support| Top: 120mm x 3 / 140mm x 2
Pre-installed Fans| Rear: 120mm Black fan x 1 ,
Speed: 1000 RPM
Connector: 3 Pin
Maximum Number of Fans| 7
Water Cooling Radiator Support| Front: 360mm / 280mm / 240mm / 140mm / 120mm
Top: 360mm / 280mm / 240mm / 140mm / 120mm
Rear: 120mm
Transparent Left Panel| Tempered Glass
Max. Graphics Card Length| 385(mm) / 15.2(in)
Max. CPU Cooler Height| 160(mm) / 6.3(in)
Max. PSU Length| 200(mm) / 7.9(in)
*Please choose either of front or top to install a 360mm radiator.
INSTALLING THE I/O CONNECTORS
- | 3.5″ HDD screws| X 8
---|---|---
| Motherboard screws / 2.5” SSD screws / 5.25” ODD screws| X 29
| Power supply screws| X 7
| Stand off for motherboard| X 3
| Cable ties| X 6
| Stand-off socket attachment| X 1
REMOVING THE SIDE PANELS
INSTALLING WATER COOLING RADIATORS & COOLING FANS
INSTALLING WATER COOLING RADIATORS & COOLING FANS
INSTALLING THE FRONT FANS & THE FRONT RADIATOR
Please remove the 5.25” ODD mounting bracket first, and then install the front
fans or the radiator.
Please install the fans or the radiator from the inside of the front panel.
Install the radiator
Install the fans
There are two mounting holes of the 360mm radiator unable to be screwed because of the space of 5.25” ODD. Please tighten the rest of the screws so the radiator can be fixed well at the front panel.
INSTALLING THE TOP FANS OR THE WATER COOLING RADIATOR & 5.25” ODD
- Please install the top fans or the water cooling radiator first. Please note that the hoses of the water cooling radiator should be placed backward.
- After the top fans or the radiator installation is completed, the 5.25” ODD can be put on.
INSTALLING THE 5.25” ODD
Please press the sides and push out the 5.25″ ODD cover.
INSTALLING THE 3.5″ HDDS
INSTALLING THE 2.5″ SSDS
GLOBAL WARRANTY POLICY
WARRANTY PERIODS OF COUGAR GAMING DEVICES
-
This warranty gives you specific legal rights. You may also have other rights granted under local law.
These rights may vary. -
Only for electrical components.
Official website
****COUGAR USA Technical Service
Tel: (833) 256-3778
Mail:rma@compucaseusa.com
Compucase Enterprise Co., Ltd.
All rights reserved.
Made in China
MX330-G PRO
FULL MESH MID TOWER CASE WITH POWERFUL AIRFLOW
Documents / Resources
|
COUGAR MX330-G Pro Full Mesh Mid Tower Case with Powerful
Airflow
[pdf] Installation Guide
MX330-G PRO, MX330-G Pro Full Mesh Mid Tower Case with Powerful Airflow,
MX330-G Pro, Full Mesh Mid Tower Case with Powerful Airflow, MX330-G Pro Full
Mesh Mid Tower Case, Full Mesh Mid Tower Case, Mid Tower Case, Case
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>