dji MATRICE 3D Drone User Guide

dji MATRICE 3D Drone

Product Information

Specifications:

• Model: DJI Matrice 3TD
• Camera: Different cameras available (refer to actual product purchased)
• Propellers: CCW Propellers (Pair)
• Features: Vision System, Auxiliary Light, Infrared Sensing System, Internal Charging Module, Front LEDs, Aircraft Status Indicators, Motors, Frame Arms with Internal Antennas, USB-C Assistant Port, Intelligent Flight Battery (sold separately), microSD Card Slot, Beacon, GNSS/RTK Antenna, E-Port, Dongle Compartment

Product Usage Instructions

Preparing the Aircraft

1. Inserting the Battery: Open the battery locking arm and insert the Intelligent Flight Battery into the battery compartment of the aircraft until a click is heard. Close the battery locking arm until the orange mark completely disappears, indicating the arm is locked.
2. Powering On/Off: Press the power button once to power on. Press and hold to power off. To check the battery level, press the power button once.

Linking and Activation
Usage: Scan the QR code provided or visit the website address to access tutorial videos and related manuals including Safety Guidelines, User Manual, and Installation and Setup Manual. It is crucial to familiarize yourself with safety precautions and understand all aircraft information before operation.

Frequently Asked Questions (FAQ):

1. Q: Can children use this product?
   A: No, this product is not intended for children. It should be operated by adults or individuals who have read and understood the guidelines and instructions.

2. Q: Where can I find additional support or after-sales service policies?
   A: For additional support or information on after-sales service policies, visit https://www.dji.com/service/policy.

In the Box

Aircraft [1] with microSD card inserted
[1] DJI Matrice 3D and DJI Matrice 3TD are equipped with different cameras. Refer to the actual product purchased. This guide uses the Matrice 3TD aircraft as an example.

• CW Propellers (Pair)
• CCW Propellers (Pair)
• Screws and Washers

Disclaimer and Warning
By using this product, you signify that you have read, understand, and accept the terms and conditions of the guidelines and all instructions at https://enterprise.dji.com/dock-2.
EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT HTTPS://WWW.DJI.COM/SERVICE/POLICY, THE PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND ON “AS AVAILABLE BASIS” WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for children.

Introduction
DJI Matrice 3D Series features both an infrared sensing system and a six- directional vision system, and comes with a high-performance multi-camera payload. The RTK module facilitates centimeter-level positioning, meeting the needs of high-precision operations and improving flight safety. The aircraft has a protection rating of IP54 (IEC 60529). The aircraft can be used with DJI Dock 2. Together with DJI FLIGHTHUBTM 2, automated operations can be achieved and real-time camera views can be obtained, meeting the needs for different scenes such as security, patrol inspection, and mapping.

Overview

1. Gimbal and Camera
2. Vision System
3. Auxiliary Light
4. Infrared Sensing System
5. Internal Charging Module
6. Front LEDs
7. Aircraft Status Indicators
8. Motors
9. Propellers
10. Frame Arms (incl. Internal Antennas)
11. USB-C Assistant Port (E-Port Lite)
12. Intelligent Flight Battery (sold separately)
13. Power Button
14. Battery Level LEDs
15. Battery Buckle
16. Battery Locking Arm
17. microSD Card Slot
18. Beacon
19. GNSS/RTK Antenna
20. E-Port
21. Dongle Compartment

Preparing the Aircraft

• Make sure the propellers are securely mounted and not damaged or deformed and that there are no foreign matter in or on the motors or propellers.
• Make sure the lenses of the vision system, gimbal cameras, the glass of the infrared sensors, and the auxiliary lights are clean and not blocked in any way.
• Make sure the covers of the microSD card slot, the USB-C assistant port (E-Port Lite), and the E-Port are firmly closed.

Inserting the Battery: Open the battery locking arm and insert the Intelligent Flight Battery into the battery compartment of the aircraft until a click is heard. Close the battery locking arm until the orange mark completely disappears, which indicates the battery locking arm is in the lock position.

Powering On/Off: Press, then press and hold.
Checking the Battery Level: Press once.

• To remove the battery, open the battery locking arms, then press the battery buckles and remove the battery.
• When transporting an unpacked dock, make sure to remove the aircraft from the dock for separate transportation.
• If the battery level is too low, charge the aircraft battery by placing the aircraft on the dock or using a charging kit (sold separately).

Linking and Activation
DJI Matrice 3D Series aircrafts should be linked with DJI Dock 2 for automated flight operations. Power on DJI RC Pro Enterprise, run DJI PILOTTM 2, and follow the instructions to complete linking, activation and dock configuration. The DJI RC Pro Enterprise remote controller can also be linked to the aircraft and used as controller B for manual control. During on-site flight tests, controller B can take control and manually control the flight. Refer to the DJI Dock 2 Quick Installation Guide for the linking process.

• The aircraft requires activation before first time use. An internet connection is required for the remote controller during activation.

Usage

Scan the QR code or go to the address to watch the tutorial videos and read the related manuals such as the Safety Guidelines, User Manual, and Installation and Setup Manual. Make sure to understand the safety precautions and learn more about aircraft information.

https://enterprise.dji.com/dock-2/video

https://enterprise.dji.com/dock-2/downloads

Specifications

• Model M3D/M3TD

• Operating Temperature -20° to 45° C (-4° to 113° F)

• Video Transmission System O3 Enterprise

• Operating Frequency [1] 2.4000-2.4835 GHz
  5.150-5.250 GHz (CE: 5.170-5.250 GHz)
  5.725-5.850 GHz

• Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
  5.1 GHz: <23 dBm (CE)
  5.8 GHz: <33 dBm (FCC/SRRC), <14 dBm (CE)

• Max Transmission Distance 15 km (FCC), 8 km (CE/SRRC/MIC)

[1] In some countries and regions, the 5.1GHz and 5.8GHz frequency bands are prohibited, or the 5.1GHz frequency band is only allowed for indoor use. Please refer to local laws and regulations for more information.

Compliance Information

FCC Compliance Notice
Supplier’s Declaration of Conformity

• Product name: DJI Matrice 3TD/DJI Matrice 3D
• Model Number: M3TD/M3D
• Responsible Party: DJI Research LLC
• Responsible Party Address: 17301 Edwards Road, Cerritos, CA 90703
• Website: www.dji.com

We, DJI Research LLC, being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.

ISED Compliance Notice
CAN ICES-003 (A) / NMB-003(A)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

EU & UK Compliance Notice
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI MATRICE 3TD/DJI MATRICE 3D) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI MATRICE 3TD/DJI MATRICE 3D) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com /euro-compliance

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This content is subject to change without prior notice.

https://enterprise.dji.com/dock-2/downloads
DJI and MATRICE are trademarks of DJI. Copyright © 2024 DJI All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>