VOLLRATH 4087936 Heavy Duty Equipment Stand User Manual

VOLLRATH 4087936 Heavy Duty Equipment Stand

Product Information

Specifications

• Models: 24, 36, 48, 60, 72 – stationary and mobile stands
• Capacity: 500-700 LB (226-317 kg)
• Designed for Vollrath gas appliances
• Intended for supporting gas appliances with corresponding widths
• Mobile stands allow limited mobility for cleaning

Product Usage Instructions

Safety Precautions

• Read and understand all safety instructions before operating the equipment.
• Use the included restraining device with caster/mobile stands to limit mobility.
• Ensure the equipment stand is placed on a flat, level surface.
• Do not use the stand if any screws are missing.
• Do not allow items to protrude or hang off the edge of the equipment stand.
• Use only with Vollrath-branded gas appliances.

Equipment Stand Assembly

1. Position the shelf at 6-1/8 inches (15.6 cm) from the floor for structural integrity.
2. Ensure all screws are in place and tight.
3. Slide the shelf to the top of the caster or weld stud. Repeat for all legs.

Function and Purpose

• The equipment stand is designed to support Vollrath gas appliances with corresponding widths.
• Mobile stands provide limited mobility for cleaning purposes only.
• Ensure thorough cleaning and drying before use.

Unpacking the Equipment and Initial Setup

Follow these steps for unpacking and setting up the equipment:

1. Dispose of packaging materials responsibly.
2. Remove all packing materials and tape from the equipment.
3. Clean any residue left by plastic or tape.
4. Insert the legs through the shelf holes. Repeat for all legs.
5. For 60 and 72 models, insert center legs into the leg holes on the shelf.
6. Slide the top onto the legs so they slide over the extrusions.
7. Tighten hex bolts with a provided wrench (75-80 in. lbs.).

FAQ

Q: Can I use this equipment stand for appliances other than Vollrath gas appliances?

A: No, this equipment stand is designed specifically for Vollrath-branded gas appliances and should not be used with other appliances.

Q: Do I need to use the included restraining device with mobile stands?

A: Yes, it is important to use the restraining device with caster/mobile stands to limit mobility and ensure safety.

Description

• Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions.
• SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.

Safety Precautions

• To ensure safe operation, read the following statements and understand their meaning. Please read carefully.
• The warning is used to indicate the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored.

WARNING Fire Hazard

• Use a restraining device to limit the mobility of caster/ mobile stands.
• The installation of this appliance must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, nFPA 54/Ansi Z223.1.
• Commercial Cooking Appliances. Commercial cooking appliances that are moved for cleaning and sanitation purposes shall be connected under the connector manufacturer’s installation instructions using a listed appliance connector complying with ANSI Z21.69/CSA 6.22, Connectors for Movable Gas Appliances. The commercial cooking appliance connector installation shall be configured under the manufacturer’s installation instructions.
• Movement of appliances with casters shall be limited by restraining devices installed with the connector and appliance manufacturer’s installation instructions.

To reduce the risk of injury or damage to the equipment:

• Use this equipment stand in a flat, level position.
• The included restraining device must be used with caster/mobile stands.
• Install the restraining appliance under the Restraining manufacturer’s installation instructions.
• Items must not protrude or hang off the edge of this equipment stand
• This equipment stand is designed to be used only with Vollrath-branded gas appliances.

FUNCTION AND PURPOSE

• This equipment is intended to be used for supporting Vorath gas appliances with corresponding widths.
• The mobile equipment stands are not intended to be used as carts but rather allow limited mobility for cleaning.
• Before using this equipment it must be cleaned and dried thoroughly.

UNPACKING THE EQUIPMENT AND INITIAL SETUP

When no longer needed, dispose of all packaging and materials in an environmentally responsible manner.

1. Remove all packing material and tape, as well as any protective plastic from the equipment.
2. Clean any glue residue left over from the plastic or tape.
3. Insert the leg (A) through the hole in the shelf (B). See Figure 1. Repeat for all the legs.
   • WARNING The shelf is to be positioned 6-1/8″ (15.6 cm) from the floor for the best structural integrity. Make sure that all screws are in place and tight. Do not use the stand if any screws are missing.
4. Slide the shelf (B) to the top of the caster (C) or the weld stud (D) See Figure 2. Repeat for all the leads.
5. 60″ and 72″ models only. Slide the center legs (D) into the center leg hole on shelf (B). See Figure 1.
6. Slide the top (E) onto the legs (A and D) so that the legs slide completely over the extrusions (C).
7. Tighten the eight hex bolts with the wrench (G) provided (75-80 in. Ibs…
   • WARNING Level or adjust the stand when there is no equipment or items on the top (E) or shelf (B).
8. Stationary stands: Place the stand into the desired location. Use the adjustable feet (E) to level the stand. See Figure 2.
   • WARNING Mobile stands must be used with a restraining device.
9. Mobile stands: Place the stand in the desired location. Install the restraining appliance in accordance with the Restraining manufacturer’s installation instructions.

CLEANING

To maintain the appearance and increase the service life, clean your equipment daily.

1. Use a damp cloth, or sponge dipped in soapy water to clean the outside of the equipment stand.

SERVICE PARTS

SERVICE AND REPAIR

• There are no user-serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the equipment or replace a damaged power cord yourself.
• Do not send equipment directly to the Vollrath Company. Please contact the qualified professional repair service listed below. Vollrath Technical Service • 1-800-628-0832

Warranty Statement for the Vollrath Co. L.L.c.

• The Vollrath Company LLC warrants the products it manufactures and distributes against defects in materials and workmanship for one year, except as specifically provided below.
• The warranty runs 12 months from the date of original installation. (End user receipt)

1. Refrigeration compressors – The warranty period is 5 years.
2. Replacement parts – The warranty period is 90 days.
3. Fry pans and coated cookware – The warranty period is 90 days
4. EverTite™ Riveting System – The warranty covers loose rivets only, forever.
5. Cayenne® Heat Strips – The warranty period is 1 year plus an additional 1 year period on heating element parts only.
6. Ultra and Professional Induction Ranges – The warranty period is 2 years.
7. Mirage and Commercial Induction ranges – The warranty period is 1 year.
8. ServeWell® Induction Workstations – The warranty period is one year on the workstation table and 2 years on induction hobs.
9. Slicers – The warranty period is 10 years on gears and 5 years on belts.
10. Mixers – The warranty period is 2 years.
11. Extended warranties are available at the time of sale.
12. Vollrath – Redco products – The warranty period is 2 years.
13. Optio / Arkadia product lines – The warranty period is 90 days.
14. All non-stick products (i.e. fry pans and surfaces) are 90 days for the nonstick surfaces.

All products in the Jacob’s Pride® collection, including the following, have a lifetime warranty:

• NSF Certified One-Piece Dishers®
• NSF Certified Spoodle Utensils
• NSF Certified Heavy-Duty Spoons with Ergonomic Handle
• NSF Certified Heavy-Duty Basting Spoons
• Heavy-duty Turners with Ergonomic handles
• One-Piece Tongs*
• Heavy-Duty One-Piece Ladles*
• Nylon Handle Whips
• One-Piece Skimmers
• Tribute®, Intrigue®, and Classic Select® Cookware*
• Jacob’s Pride® warranty does not cover Kool-Touch®, nonstick coatings, and silicone handles.

Items sold having no warranty:

• Meat Grinder Knives
• Light Bulbs in Convection Ovens and Hot Food Merchandisers
• Oven Door Seals
• Oven Door Glass
• Hot Food Merchandisers / Display Case Glass
• Calibration and set up of gas equipment
• Slicer / Dicer blades (tabletop food prep) – Redco and Vollrath

THIS WARRANTY IS IN PLACE OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

• As The Vollrath Company LLC’s only responsibility and the purchaser’s only remedy, for any breach of warranty, The Vollrath Company LLC will repair or, at its option, replace the defective product or part without charge, except as otherwise provided below:

• For refrigeration compressors and the second year of the warranty on Cayenne® Heat Strips and mixers, The Vollrath Company LLC will provide the repaired or replacement part only; and the buyer will be responsible for all labor charges incurred in performing the repair or replacement.

• To obtain warranty service, the buyer will be responsible for returning to The Vollrath Company LLC any product (other than gas equipment that is permanently installed) weighing less than 110 lbs. or located outside of a 50-mile radius of a certified technician designated by The Vollrath Company LLC to perform warranty repairs. If a Vollrath Technician cannot be contacted check the website for service contact points. (Please refer to the Product Catalogue for weights and sizes of product)

• No remedy will be available for products that have been damaged by accident, carelessness, improper installation, lack of proper setup or supervision when required, neglect, improper use, installation, or operation contrary to installation and operating instructions or other causes not arising out of defects in materials or workmanship. At the buyer’s request, The Vollrath Company LLC will repair and or replace such products at a reasonable cost.

• No remedy will be available for slicers where the blade has not been sharpened (Refer to owner’s manual for sharpening instructions)

• No remedy will be available for mixers damaged by changing gears while the unit is running or overloading, in either case as determined by a Vollrath Certified Technician

• Warranty work must be authorized in advance by The Vollrath Company LLC. See the operating and safety instructions for each product for a detailed warranty claim
  procedures.

• No remedy will be available for the product returned and found to be acceptable to the product specification.

• No remedy will be available under any warranty not registered as required below.

• LIMITATION OF LIABILITY: THE VOLLRATH COMPANY LL C SH ALL HAVE NO LIABILITY FOR INCIDENTAL OR CONS EQUENTIAL DAMAGES OF ANY KIND, WHETHER BASED UPON NEGLIGENCE OR OTHER TORT, BREACH OF WARRANTY, OR ANY OTHER THEORY.

Warranty Procedure On all warranty calls, the following process and information is required:

• All warranty claims will start with a call to the Vollrath Technical Service support line. (800-628-0832).
• A technical support professional will work to diagnose the issues and provide the details for the service solution.
• Name and phone number of the person calling
• Business name, street address, city, state, and zip
• Model and serial number
• Date of purchase and proof of purchase (Receipt)
• Name of the dealer where the unit was purchased
• NOTE: Vollrath will not accept products sent without the proper procedure being followed.

Important:

• TO MAKE A CLAIM FOR ANY REMEDY UNDER THIS WARRANTY, YOU MUST REGISTER YOUR WARRANTY.

Register Today

• ONLINE: Register your warranty online now at www.Vollrathco.com
• NO WEB ACCESS: If you do not have access to the web, kindly register by completing the warranty registration form and faxing it to The Vollrath Co. LLC office in the country of purchase.
• The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
• Main Tel: 800.628.0830
• Fax: 800.752.5620
• Technical Services: 800.628.0832
• Service Fax: 920.459.5462
• Canada Service: 800.695.8560
• © 2010 The Vollrath Company, L.L.C.
• www.vollrathco.com

Documents / Resources

| VOLLRATH 4087936 Heavy Duty Equipment Stand [pdf] User Manual
4087936 Heavy Duty Equipment Stand, 4087936, Heavy Duty Equipment Stand, Duty Equipment Stand, Equipment Stand, Stand
---|---

References

• Commercial Foodservice & Kitchen Equipment | Vollrath Foodservice

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>