Outwell 651192 Mensa Mains 3 Way Roller Kit with USB Light Instruction Manual

Outwell 651192 Mensa Mains 3 Way Roller Kit with USB Light

Product Information

Specifications:

• Model: 651192 (UK) / MPR-H /30640-1
• Model: 651191 / MPR-H / 30640
• 3-way mains roller with USB light
• 15m connection lead
• 2 x USB ports
• 3 x 230V sockets (EU), 3 x 240V sockets (UK)
• 12 LED light
• Residual Current Device (RCD) and Miniature Circuit Breaker (MCB)
• Power button LED light for ON/OFF
• Retractable support stands

Product Usage Instructions

Installation and Use:

1. Check the reel for correct operation by pulling out the cable and connecting the plug to a main supply.
2. Connect devices to USB ports or sockets using suitable cords.
3. Turn on/off the LED light using the power button for better illumination.
4. Use retractable support stands for stability during operation.
5. Ensure the cable is dry and fully reeled in after use.

Cleaning and Maintenance:

1. Visually inspect the mains roller and cable regularly.
2. Clean with a damp cloth if needed; avoid detergents or solvents.\
3. Do not use sharp objects or cleaning agents that may damage the product.

Storage:
Dry the product if wet after use and store in a cool, dry place away from direct sunlight.

Disposal:

1. Disconnect from the power source before disassembly.
2. Cut the cable close to the reel and dispose of it as electric waste per local regulations.
3. Dispose of disassembled parts following local electric waste regulations.

Frequently Asked Questions (FAQ):

• Q: How often should I test the RCD on the mains roller?
  A: The RCD should be tested monthly by pushing the ‘T’ button to ensure proper functionality.

• Q: Can I power multiple devices simultaneously using the mains roller?
  A: Yes, you can power multiple devices by utilizing the USB ports and sockets available on the main roller.

IMPORTANT

Read the instructions before using the product. Keep these instructions for future reference

MODELS

WARNINGS

• Do not connect or disconnect the unit with wet hands and do not disconnect by pulling on the connection cable, only pull on the plug.
• Only use the mains roller in the described manner.
• Do not use the product if it is damaged.
• Do not immerse the appliance in any liquids.
• Do not leave or use the product near sources of heat or in direct sunlight.
• It is recommended to only use the cable reel with the cable fully extended.
• Do not use the connection lead as a handle to carry the unit, only use the assigned carry handle.
• Do not use the product with damaged input or output cables, risk of electric shock

OVERVIEW OF THE MAINS ROLLER

1. Residual Current Device (RCD)
2. Miniature Circuit Breaker (MCB)
3. 15m connection lead
4. 2 x USB ports
5. 3 x 230V sockets (EU), 3 x 240V sockets (UK)
6. 12 LED light
7. Power button LED light (ON/OFF)
8. Retractable support stands

INSTRUCTIONS FOR USE

OPERATION:

The Mensa Mains 3way Roller Kit w. USB light is equipped with a set of safety features. Residual Current Device (RCD):

• Protects against indirect contact and provides additional protection against direct contact
• Protect installations against fire hazard due to insulation faults

Push the button marked ‘T’ on the RCD monthly to make sure the device works. This simulates a tiny imbalance between the active and neutral conductor, causing the device to trip and the switch to move to its lower position. Push the switch to the upper position to reset.

Miniature Circuit Breaker (MCB):

• Short circuit protection
• Overload protection

The device switches off in the event of leakage or fault currents. The RCD and MCB must be reset manually after a power cut, by pushing the switch to the upper position.

Installation and use:

• Check the reel for correct operation by slowly pulling out all the cable and connecting the plug to a mains supply. If necessary, use UK or EU conversion plugs available from your dealer.
• To power a device from the mains roller, connect the device to one of the two USB ports, or one of the three 230V sockets (5), using a suitable cord. Multiple sockets and ports can be used to power multiple devices simultaneously.
• The bright LED light can be turned on and off using the power button, to allow for better work light during operation.
• The two retractable support stands can be used for improved stability during operation and when multiple sockets are in use.
• After use, make sure the cable is dry and fully reeled into the cable drum using the roll-up reel handle.

Cleaning and maintenance:

• Visually check the general condition of the mains roller and cable regularly.
• The main roller can be cleaned with a damp cloth if necessary. Do not use detergents or solvents.
  WARNING : Do not use sharp or hard objects or cleaning agents for cleaning as these may damage the product.

Storage:
If the product is wet after use, use a dry cloth to remove any moisture. Store the product in a cool and dry place and avoid direct sunlight

Disposal:

• Disconnect the mains roller from any power source before starting the disassembly process. Fully unwind the cable and use a wire cutter, or similar tool, to cut the cable as close to the reel as possible. Remove the cable and dispose of it as electric waste according to local regulations.
• Remove the four screw caps and unscrew the four Torx screws using a T15 bit to remove the front cover of the main roller. Unscrew all screws inside the cabinet and remove the LED light unit, the RCD and MCB, the USB circuit board and all electric wires inside. Dispose of the parts as electric waste according to local regulations.
• When all electrics have been disassembled, remove the retractable support stands by pulling them out, and dispose of the metal parts according to local regulations.
• Dispose of the remaining plastic cabinet according to local regulations.

Light Source  LED

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Any attempt to access light source and control gear runs the risk of electric shock through contact with high voltages. It will also introduce weak points in the construction that could reduce the lifetime of the product.

Technical data

• Cord information:
  H05VV-F 3G1.5mm2 15 mtr.

• LED light:
  Max 5V , 1.5W

• USB Output:
  5.0V , 1.6A Max 8.0W (light on) / 5.0V , 2.1A Max 10.5W (light off)

• USB-Input:
  100-250V 50/60HZ, 20W

• USB model:
  HUQ-D-5V2A0030

Parameters

Lights off:

• Average active efficiency: 79.59%
• Efficiency at low load 10%: 56.93%
• No-load power consumption: 0.07W

Lights on:

• Average active efficiency: 77.46%
• Efficiency at low load 10%: 62.28%
• No-load power consumption: 0.07W

Rewirable Cable

• When replacing the rewirable cables, make sure the earthing conductor has ample slack, so that if the strain relief should fail, the earthing conductor is subjected to strain after the connections of the current-carrying conductors, and that, in case of excessive stress, the earthing conductor will break after the current-carrying conductors.
• Please follow the guidelines: Fix the cables in the cable anchorage and use a tape measure or similar to measure the length of the wires, to make sure the earthing wire (Green/Yellow), is at least 30mm longer than the current-carrying wires (Brown/Blue) before cutting them and connecting them to the assigned terminals in the junction box.

Degree of protection:
The product is water resistant to IP44

Outwell Customer Service
e-mail: info@outwell.com
Tel.: +45 70 50 59 00

DK-51592018
Outwell® is a reg. trademark of Oase Outdoors
EU : Kornvej 9, DK-7323 Give, Denmark
UK : One Glass Wharf, Bristol, BS2 0ZX
© 03/2024 Oase Outdoors ApS. Made in China
outwell.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>